Manual Lowrance HDS-10 (page 15 of 52) (English)

599178

Zoom out

Zoom in

1/52

Transducer Installation

Recommended Tools and Supplies

Tools and Supplies (not included)

If you plan to route the transducer cable through the transom, you will need either a 1” drill

bit or a 5/8” drill bit depending on the size of the transducer cable connector. Each transom

mount requires a high quality, marine grade above- or below-waterline sealant/adhesive

compound. The following installations also call for these recommended tools and supplies.

One-piece Bracket Transom Installation

Tools: two adjustable wrenches or socket wrench, drill, #29 (0.136”) drill bit, screwdriver.

Supplies: none.

Two-piece Bracket Transom Installation

Tools: two adjustable wrenches or socket wrench, drill, #20 (0.161”) drill bit, screwdriver.

Supplies: four, 1” long, #12 stainless steel wood screws.

TMB-S Bracket Trolling Motor Installation

Tools: two adjustable wrenches or socket wrench, screwdriver. Supplies: plastic cable ties.

Skimmer Transducer Shoot-through Hull Installation

Supplies: alcohol wipes, 60 and 160 grit sandpaper, and marine grade above- or below-

waterline epoxy adhesive.

Pod Transducer Shoot-through Hull Installation

Supplies: alcohol wipes, 60 and 160 grit sandpaper, and marine grade above- or below-

waterline epoxy adhesive.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Lowrance HDS-10 in the language / languages: English as an attachment in your email.

The manual is 9,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lowrance HDS-10

Lowrance HDS-10 Quick start guide - English - 6 pages

Lowrance HDS-10 User Manual - English - 134 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Lowrance HDS-10 Manual

Product: