Manual Lowrance GlobalMap 7500C (page 86 of 144) (English)

599426

Zoom out

Zoom in

1/144

To setup Loran TD:

NOTE:

If the Loran TD conversion is chosen, you must enter the local Lo-

ran chain identification for the master and slaves. Do this by se-

lecting "Setup Loran TD" at the bottom of the "Coordinate System"

menu and select the ID. Press

EXIT to clear this menu.

Configure Loran TD menu.

Map Fix

Map Fix is used with charts or maps. This system asks for a reference

position in latitude/longitude, which you take from a marked location

on the map. It then shows the present position as distance on the map

from that reference point.

For example, if it shows a distance of UP 4.00" and LEFT 0.50", you

then measure up four inches and to the left a half-inch from the refer-

ence point to find your location on the map.

Configure a map fix:

First, take your map of the area and determine a reference lati-

tude/longitude. (Please note that in order for this system to work, the

latitude/longitude lines must be parallel with the edge of the map.

USGS maps are parallel, others may not be. Also, this works better

with smaller scale maps.) The reference position can be anywhere on

the map, but the closer it is to your location, the smaller the numbers

will be that you'll have to deal with.

Once you've decided on a reference position, you can save it as a way-

point. See the waypoint section for information on saving a waypoint.

Save the reference position as a waypoint. Exit from the waypoint

screens.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Lowrance GlobalMap 7500C in the language / languages: English as an attachment in your email.

The manual is 5,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Lowrance GlobalMap 7500C Manual

Product: