Manual Lowrance GlobalMap 5500C (page 100 of 136) (English)

599419

100

Zoom out

Zoom in

1/136

decide to start the gauge at 0, 5 or 10 and top it out at 85, 90 or 100.

Minimum or Maximum Tick controls how many tick marks will be dis-

played on the gauge. If you set the minimum tick to 1 and the max tick

to 10, there will be 10 tick marks between 0 and 10, 10 and 20 and so

on. In the case of a speedometer, that's one tick for one mile per hour. If

you change the minimum tick to 2 and leave the maximum tick at 10,

you'll have one tick for every two miles per hour. That's five ticks be-

tween 0 and 10, 10 and 20 and so on.

Thresholds setup can be used as a visual aid to mark portions of the

gauge. It is divided into Upper and Lower Thresholds, each containing

major (warning) and minor (caution) threshold settings. Two sets of

numbers must be entered for each threshold. Minor thresholds ranges

are colored yellow. Major threshold ranges are red.

The GlobalMap 4900M uses different shades of gray to separate

thresholds from the rest of the gauge.

GlobalMap 5500C Text Setup menu( left) with transparent gauge la-

beled as "track"; Text Setup menu with destination house number en-

tered in units text position (right).

Text setup allows you to individually label gauges. There are two win-

dows in Text Setup: Gauge Text and Units Text. Units Text is posi-

tioned at the bottom of the gauge. Gauge Text is located above the

Units Text.

Default

The Default command restores the factory default settings. The button

is labeled

RESTORE DEFAULTS in the GlobalMap 4900M

NOTE

The Analog setup menus for both the GlobalMap 5500C and

GlobalMap 4900M allow you to make gauges transparent. Despite

their transparency, the gauges take up much of the display screen.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Lowrance GlobalMap 5500C in the language / languages: English as an attachment in your email.

The manual is 3,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Lowrance GlobalMap 5500C Manual

Product: