Manual Lowrance GlobalMap 2000 (page 39 of 92) (English)

599375

Zoom out

Zoom in

1/92

seven menu selections on this

screen, all of which relate to the

trail plotter. After you’ve made

a selection on this screen, press

the CLR key to exit.

Clear Trail

The first item at the top of the

screen is “Clear Trail.” This

erases the plot trail from the

screen. This is only temporary,

the GlobalMap 2000 will con-

tinue to draw your trail from the

location it was in when the key next to the “Clear Trail” label was pressed.

If you wish to change the plot trail from a solid line to a dotted one, then

press the key next to the “Trail Type” label until the check mark is on the

desired box.

Trail Recording and Display

To stop the GlobalMap 2000 from drawing the plot trail, press the key next

to the “Trail Recording” label. The GlobalMap 2000 not only will stop

drawing the plot trail, but also will not keep track of it in memory. However,

it will show your trail on the map up to the point that you turned it off. If you

wish to temporarily stop the plot trail, but wish to resume its display at a later

time, showing the path you’ve taken, then press the key next to the “Trail

Display” label. This turns the plot trail off, but it’s still kept in memory. If you

turn the trail display on again, it will show your entire plot trail (if there’s

enough memory.) There’s a maximum of 2000 dots available to plot a trail.

Plot Trail - Distance Interval

There’s a certain amount of memory reserved for the plot trail. If the unit

runs out of memory, then it will continue to draw the plot trail, but for every

dot it places at the end of the trail, it will erase one at the beginning. When

the unit is turned on for the first time, the unit’s plot trail settings are

optimized for the typical user. The trail is recorded by the distance

travelled, which is preset to draw one dot every 0.001 mile. In other words,

every time you move .001 mile, the unit places a dot on the trail behind your

present position. The distance can be changed from 0.001 to 10 miles by

pressing the key next to the “Distance Interval” menu. The number at the

far right of that label shows the distance interval currently in use. Once you

press the key next to that label, a new menu appears. Press the key next

to the desired distance interval. The unit returns to the Trail Plotter menu.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Lowrance GlobalMap 2000 in the language / languages: English as an attachment in your email.

The manual is 0,86 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Lowrance GlobalMap 2000 Manual

Product: