599375

Lowrance GlobalMap 2000 Manual

25
Zoom out
Zoom in
Previous page
1/92
Next page
23
The unit usually only takes a few minutes or less to find the satellites once
it’s been initialized by the user.
To initialize the GPS module,
first press the MENU key. Now
press the key next to the “GPS
/ DGPS Setup” label. The screen
at right appears. Finally, press
the key next to the “Initial Time
and Position” label. The screen
shown below appears.
This is the GPS module initial-
ization screen. The settings now
in use are shown at the top of
the display. The first number in
the latitude display should be
flashing. If you’re using the unit
for the first time, these settings
are probably wrong for your po-
sition and time. To change any
of the numbers on this display,
simply press the arrow keys to
move to the desired number
that you wish to change. For
example, to change the latitude
to 41°18.023', first press the 4
key while the “3” in the latitude is
flashing. This changes the “3” to
a “4”. It also moves one digit to
the right, making the number “5” start flashing. Now press the 1 key.
Continue until all of the numbers in the latitude have changed. If you need
to change the latitude from north to south, press the key next to the “Toggle
N/S latitude” label in the middle of the screen. When you’re finished with
the latitude, press the down arrow key once. This moves you to the
longitude field. An asterisk (*) flashes in front of the “8” in the longitude. If
your longitude is less than 100 degrees, simply press the right arrow key
to move to the “9”, then enter your present longitude the same way you
entered the latitude. If your longitude is over 100 degrees, simply enter your
present longitude. The label at the middle of the screen now shows “ Toggle
E/W Longitude”. Press the key next to this label to change the longitude
from west to east, if necessary.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lowrance GlobalMap 2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lowrance GlobalMap 2000 in the language / languages: English as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info