599374
62
Zoom out
Zoom in
Previous page
1/92
Next page
56
receiver turned on and watch your plot trail with position pinning turned
off. You’ll see the present position change, speed increase and decrease,
and a random plot trail on the plotter’s screen.
If you wish to turn the position pinning feature off, press the MENU key,
then highlight the “GPS Setup” label and press the right arrow key. Now
highlight the “POSITION PINNING” label. Finally, press the left arrow key.
ALARMS
This unit has several GPS alarms. (Sonar alarms are covered in the
sonar section of this manual.) You can set an arrival alarm to flash a warn-
ing message and sound a tone when you cross a preset distance from a
waypoint. For example, if you have the arrival alarm set to .1 mile, then
the alarm will flash a message when you come within .1 mile of the re-
called waypoint. The course deviation indicator alarm (CDI) can warns
when your track drifts too far to the right or left of the course line to the
waypoint. For example, if the alarm is set to .1 mile, then the alarm flashes
a message if you drift .1 of a mile or more to the right or left of the line to
the waypoint. The anchor alarm is triggered when you drift outside of a
preset radius. Again, using the .1 mile as an example, if you’re anchored
and your boat moves more than .1 of a mile, the alarm will flash a mes-
sage and sound a tone.
To use any of these alarms, first press the MENU
key, then select the “ALARMS” menu. Next, se-
lect “GPS ALARMS”. A screen similar to the one
shown at right appears. Press the up or down
arrow key to select the desired alarm, then press
the right arrow key to turn it on.
To adjust an alarm’s distance, move the black
box to the alarm’s “DIS” menu item, then press
the right or left arrow keys to increase or decrease the alarm’s distance.
When you’re finished, press the EXIT key to erase this menu.
Important Alarm Notes:
Anchor Alarm - Since civilian users don’t receive the accuracy given to
military users, the anchor alarm may be triggered even when you’re sit-
ting still. This typically happens when using small (less than .05 mile)
anchor alarm ranges. If you have a DGPS beacon receiver connected to
this unit, smaller ranges may be usable.
Arrival Alarm - If you set the arrival alarm’s distance to a small number,
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lowrance GlobalMap 1600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lowrance GlobalMap 1600 in the language / languages: English as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info