16
Fuel Remaining Source
The Fuel Remaining source function allows you to select the device
used to measure the amount the fuel remaining in the tank. It will be
set to fluid level by default. The Fuel Remaining Source should be set
to fuel flow (Eng/FFlow) if you are going to use the EP-85R to monitor
the fuel remaining.
To set Fuel Remaining Source to fuel flow:
1. Press MENU, use the UP and DOWN keys to select SYSTEM SETUP and
press
ENTER.
2. Highlight
FUEL SETUP and press ENTER.
3. Select
FUEL REM SRC (Fuel Remaining Source) and press ENTER.
4. Highlight
ENG/FFLOW (Fuel Flow) and press ENTER.
NOTE:
If you select Fuel Level (Fluid Level) as the Fuel Remaining
Source, the EP-85R WILL NOT calculate Fuel Range.
Fuel Setup
The Fuel Setup menu allows you to adjust options used to measure fuel
economy. The following options can be set or reset through the Fuel
Setup menu: Refill Tank, Partial Fill, Economy Speed Source, Fuel
Remaining Source, Reset Trip Fuel and Reset Seasonal Fuel.
Refill Tank
Since the EP-85R is not connected to the tank, its fuel information is
not automatically updated when the tank is filled up. You must use the
Refill Tank command to ensure the fuel information in the EP-85R
stays consistent with the amount of fuel actually in the tank.
The Refill Tank command will NOT be used when the EP-65R Fluid
Level is set as the Fuel Remaining Source.
To refill tank:
1. Press MENU, use the UP and DOWN keys to select SYSTEM SETUP and
press
ENTER.
2. Highlight
FUEL SETUP and press ENTER.
3. Select
REFILL TANK and press ENTER. The select Tank menu will
appear with up to three options. Select the tank you refilled and press
ENTER. (If you have one tank, you will be taken directly to the
recalibration window mentioned in step 4.)