13
4. Select the desired engine and press
MENU. The Select Level menu
will appear with two options: High Level and Low Level.
5. Select
LOW LEVEL or HIGH LEVEL and press MENU. The Level Percentage
window will appear. It will be set to Off by default.
6. Use the
UP and DOWN keys to input the desired percentage of tank
capacity and press
MENU. If the fuel falls below that percentage, the
alarm will go off. Let the menus time out to return to the main display.
NOTE:
To turn off a fuel warning, repeat Steps 1-4, then select
OFF from
the Level Percentage window mentioned in Step 5. Press
MENU.
Repeat these steps for each warning you want to turn off. Let the
menus time out and you will be directed to the main display.
Reset
The Reset command in the storage device menu will clear all stored
data from EP-85R memory.
NOTE:
After using the Reset command to clear data from EP-85R memory,
you will have to re-enter your engine-tank configuration. The Reset
command will not affect the configuration or calibration of other
devices on the network.
To use reset command:
1. Press
MENU, select SYSTEM SETUP and press MENU.
2. Highlight
BUS DEVICES, select STRG DEV (Storage Device) and press
MENU. The Configuration Options menu will appear with two options:
Fuel Wrng and Reset.
3. Select
RESET and press MENU. The following message will appear: Hit
Menu to Rst Values.
4. Press
MENU, then let the menus time out to return to the main
display.
