599456
4
Zoom out
Zoom in
Previous page
1/48
Next page
4
Cut the fuel hose where you intend to install the EP-60R sensor. Slide
a clamp over the hose coming from the tank, then push the hose onto
the bottom (inlet) hose barb.
Seat the hose flush against the sensor housing, then tighten the hose
clamp. Attach the hose leading to the engine on the top (outlet) barb in
the same way.
Push the fuel line onto the hose barb, then tighten the hose clamp.
Orient the sensor vertically, with the flow arrow pointing up.
NOTE:
You must install an in-line fuel filter between the tank and the EP-
60R sensor. This will prevent a malfunction caused by
contaminated fuel. Debris in unfiltered fuel can clog the sensor's
turbine and result in rough performance or engine shut down.
As with any fuel system, we recommend you always carry onboard
a spare fuel filter and an in-line 3/8" splice barb. This allows you to
remove a clogged EP-60R fuel sensor or fuel filter and restore
engine operation if the fuel filter fails. We strongly recommend that
you inspect your entire fuel system at regular intervals.
Secure the sensor/hose assembly so the sensor remains in a vertical
position with the flow direction up. Clamp the hose on either side of the
sensor to the hull or bulkhead to minimize vibration.
Route the sensor's cable connector to the T on the network backbone
where you intend to attach it, and plug it in. The sensor is ready to use.
Flow
direction
From
tank
To
engine
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lowrance EP-60R Fuel Flow at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lowrance EP-60R Fuel Flow in the language / languages: English as an attachment in your email.

The manual is 2,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info