SETTING THE TIME (HOUR, 24HOUR, MINUTE and SECOND)
2. SETTING THE DATE
C-1) SETTING THE DAY
1. Pull the crown out to the 2nd position to stop the second hand at 0 (12 o’clock).
2. Turn the hour/minute hands in a clockwise direction to set a day.
3. In order to set the day, you must advance the hour hand by 24 hours per day.
* If the day is set by turning the crown counterclockwise, there is the possibility the date will not change over.
Do not set the day by turning the crown in counterclockwise direction.
* The day changes somewhere between 0:00a.m. and 5:30a.m. or a little later.
C-2) SETTING THE TIME
After setting the day, set the hour (and 24hour) and minute hands.
1. Turn the hour/minute hands in a clockwise direction to set the time.
2. To ensure time is set accurately, rst turn the minute hand 5 minutes ahead of desired time and then turn back (in a
counterclockwise) to the desired time.
3. After setting the time, use a time signal to synchronize the watch by pushing crown to the normal position to start the second
hand going.
* Make sure you have correctly set AM/PM before setting the time.
* When the day changes over, it is a.m.. (Day changes over between 0:00a.m. and 5:30a.m. or little later).
Check am./p.m. by the 24hour hand.
C) SETTING THE DAY AND TIME (HOUR, 24 HOUR, MINUTE AND SECOND)
The hour, 24 hour, minute, second and day are set by the same operation.
SETTING PROCEDURE
minute hand
hour hand
second hand
24hour hand
1st position
2nd position
day ( of the week )
date
normal crown position
NORMAL CROWN POSITION
1ST POSITION - QUICK OPERATION - DATE (COUNTERCLOCKWISE)
2ND POSITION - TIME/DAY SETTING (CLOCKWISE)
DAY
MINUTE
SECOND
HOUR & 24HOUR
E) SETTING THE DATE (BY QUICK OPERATION)
Pull the crown out to the 1st position. Turn the crown counterclockwise to set the date quickly.
* Do not set the date between the hours 9:00p.m. and 0:30a.m.. The date may not change correctly the next day.
By virtue of the regulations pursuant to the handling of waste products deriving from electronic and electrical equipment, end of lifecycle watch making
products must be selectively collected for processing. You may therefore dispose of your quartz watch making products at any of our retail outlets or any other
authorized collection point. The selective collection, processing, rating and recycling of these products helps contribute to safeguarding the environment and
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Lotus 18576 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Lotus 18576 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.
The manual is 0,25 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
