Manual Lotus 10128 (page 10 of 25) (English, German, French, Italian, Spanish)

649785

Zoom out

Zoom in

1/25

ILM0S49 ILM0S49

English

Place the module on case back shown in the figure and position the reference hand, then fit

the hands according to the following procedures.

1. Pull out the crown to the time setting position. (2nd Click Position)

2. Turn the crown anticlockwise, and stop turning right after the date changes. After the date

starts changing, turn the crown slowly.

3. Push in the crown by one step. Be careful of not turning the crown.

4. Fit the reference hand, hour hand and minute hand to the 12-o’clock position. When fitting

the hands, remove the case back and place the movement on work stand (mount).

* Demonstration of 1/20 Second Chronograph Hand at the actual position (8H-4H) can be

made when the hand is fit at 12H as ZERO position.

* For demonstration at other position, fit the 1/20 Second Chronograph Hand at 20 tick

marks (scale) before the RETROGRADE STARTING POSITION as the ZERO position.

FITTING METHOD OF HANDS

The tachymeter is the device which measures the speed of an automobile. Knowing

is how many seconds the car covers a distance of 1km, the meter can measure the

approximate average speed per hour during a journey (up to the maximum measurable

range of tachymeter is 60 seconds.)

If the chronograph is started at the same time as measurement, and stopped after

1 km, the average speed per hour can be determined according to the position of the

second hand. If the car covers the distance of 1km in 45second, the average hourly

speed during the journey will be about 80 km.

TACHYMETER

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Lotus 10128 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Lotus 10128 Manual

Product: