704496
2
Zoom out
Zoom in
Previous page
1/2
Next page
This watch contains precise electronic
components. Never attempt to open the case or
remove the back cover.
• BATTERY
CAUTION
Do not expose the old battery to fire
or recharge it. Keep it at a place
beyond the reach of chil dren. If a
child swallows it, consult a doctor
immediately.
WATER RESISTANT
Condition
of use
Accidental
contact
with water,
such as
splashes
and rain
Swimming
and taking
a shower
Skin
diving
Scuba
diving
Indication
on the dial/
case back
No
Indication
* If your watch is 200 M/20 BAR, 100 M/10 BAR or
50 M/5 BAR water resistant, it is so indicated on
the dial/case back.
Do not operate the buttons when the watch is
wet.
If the watch is exposed to salt water, rinse it in
fresh water and then wipe it thoroughly dry.
Should you find any water or condensation
inside the watch, immediately have it checked.
Water can corrode electric parts inside the
case.
NO NO NO
YES YES NO NO
YES YES NO
NO
NO
NO
YES
WATER
RESISTANT
WATER
RESISTANT
(50M/5 BAR
)
WATER
RESISTANT
100M/10 BAR
or above
(
NO
Caution:
LEATHER BAND
A leather band is susceptible to discoloration
and deterioration from moisture, sweat and
direct sunlight.
Wipe off moisture and sweat as soon as
possible by gently blotting them up with a
dry cloth.
Do not expose the watch to direct sunlight
for a long time.
Please take care when wearing a watch with
light-colored band, as dirt is likely to show up.
Refrain from wearing a leather band watch
other than Aqua Free bands while bathing,
swimming, and when working with water even
if the watch itself is water-resistant enforced
for daily use(10-BAR/20-BAR water resistant).
PLASTIC BAND
As for material characteristics, the band
is easily dirtied, and may be stained and
discolored. Wipe off dirt with a wet cloth or
cleaning tissue.
Unlike bands of other materials, cracks may
result in the band being cut. Take care not to
damage the band with an edged tool.
ALLERGIC REACTION
Because the case and band touch the skin
directly, it is important to clean them regularly. If
not, shirt sleeves may be stained and those with
delicate skin may develop a rash. Please wear
the watch with some play to avoid any possible
allergic reaction. If you develop a rash on your
wrist, stop wearing and consult a physician.
• MAGNETISM
Your watch will be adversely affected by strong
magnetism. Keep it away from close contact with
magnetic objects.
SHOCKS AND VIBRATIONS
Your watch may be worn for normal sports
activities, but be careful not to drop it or hit it on
hard surfaces.
• TEMPERATURE
Your watch is preadjusted so that constant
accuracy may be insured at normal tem pera ture.
• CLEANING
Use only a soft cloth and clean water for
cleaning your watch. Never use chemicals, as the
waterproof gasket will corrode.
Printed in China
YES
CARE OF YOUR LORUS WATCH
SERVICE
When your LORUS watch requires repair or
servicing, please see the enclosed WARRANTY/
GUARANTEE.
* From NORMAL TIME mode, Press S3 button
once to enter the STOPWATCH mode.
HOW TO USE STOPWATCH
Standard Measurement
S1
Start
Stop
Reset
S1
S2
1. Press S1 button alternately to start and stop
the STOPWATCH.
2. Press S2 button to reset the STOPWATCH to
"00:00:00."
START/STOP
RESET/SPLIT
S2
S1
STOPWATCH
MODE
HOW TO USE EL BACKLIGHT
Note:
1. The backlight of the watch employs an
electro-luminescent (EL) light, which tends to
lose illuminating power after very long use.
2. The illumination provided by backlight may be
hard to see when viewed under direct sunlight.
* When the illuminating light becomes dim,
replace the battery with new one.
* Press S4 button in any mode to turn the
illuminating light on.
S4
LIGHT ON
Split Time Measurement
1. Press S1 to start counting first split time.
2. Press S2 button, the STOPWATCH keeps
counting first split time and showing it on the
display.
3. Press S1 button to stop counting first split time.
4. Press S2 button to release first split time.
5. Press S1 button to start counting second split
time. The STOPWATCH shows second split time.
* This operation can be repeated and the split
time can be read.
6. Press S2 to finish counting the split time.
7. Press S2 again to reset the STOPWATCH to
"00:00:00."
Start
Split 1
Reset
Split 2
Stop
S1
S2
S2
S2
S1
* Press S3 button return to NORMAL TIME display.
This watch is powered by two batteries, one for
the analogue movement and the other for the
digital movement.
Analogue quartz movement: The miniature
battery SEIKO SR626SW, Maxell SR626SW or SONY
SR626SW.
Digital quartz movement: The miniature
battery SEIKO CR2025, Maxell CR2025 or SONY
CR2025 which powers your watch should last
approximately 2 years each. However, because
it is inserted at the factory, the actual life of the
battery once in your possession may be less than
2 years.
Be sure to replace the batteries to prevent any
possible malfunction as soon as they run down.
To replace the batteries, we recommend taking
the watch to a local watch repair shop.
Note: If the alarm is used for more than 60
seconds a day, the battery life may be less
than the specified period.
After the batteries are replaced with new
ones, set the time, calendar and alarm.
BATTERY CHANGE
(
Engagement/Disengagement of ALARM &
CHIME
* In the ALARM setting mode, with each press
of S1 button, the ALARM and CHIME can be
engaged or disengaged in the following order.
The ALARM signal and/or CHIME signal appear
or disappear on the display accordingly.
S1
S1
S3
NORMAL TIME
S1
ALARM ON
CHIME ON
ALARM/CHIME ON
S1
ALARM MODE
How to stop the alarm sound
Press S3 to turn the snooze function on or off
alternately. When the snooze function is enabled,
the alarm will stop sounding temporarily and
go off again 5 minutes later for 20 seconds and
automatically stop.
Press S1 or S2 to stop the alarm while it is sounding.
Snooze function
PRESS
S3
twice
NREZ021C.indd 2 2018/12/06 14:53
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lorus Z026 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lorus Z026 in the language / languages: English as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info