593901
5
Zoom out
Zoom in
Previous page
1/6
Next page
HOW TO RESET THE WATCH
1. Press buttons A, B, C, and D simultaneously
in any display mode for 1 second to reset the
watch. All indicators appear on the watch
display and all digits are reset to “8”.
ILLUMINATING LIGHT
To turn the backlight on, press button A in any
3. Press button D to take the next split time.
4. Press button C to stop the stopwatch.
5. Press button D to reset.
* The split time can be measured repeatedly by
pressing button D.
6. Press button B to go back to the Time/
Calendar display.
Manual reception
If the watch fails to receive radio signals,
conduct manual reception.
1. Press button D in the Time/Calendar display
for more than 2 seconds. The watch starts
receiving the radio signal.
2. After the watch succeeds in receiving a
radio signal, or if it fails to receive a signal in
about 5 minutes, it will return to the Time/
Calendar display.
* To return to the Time/Calendar display manually,
press any of the buttons.
Checking the reception result
Look at the antenna mark in the Time/Calendar
display to check the reception result.
AUTOMATIC TIME SETTING
The watch can maintain precise time by
automatically receiving a radio signal which
broadcasts the official time standard once a
day. A radio signal can be selected between
MSF and DCF77.
* MSF is the radio signal for broadcasting the
official time standard for the United Kingdom,
and DCF77 is for Germany. The watch can
receive MSF when it is placed within
approximately 800 km from the MSF transmitter,
and can similarly receive DCF77 when it is
placed within approximately 1,000 km from the
DCF77 transmitter, depending on conditions.
Automatic reception
The watch receives the selected radio signal
automatically to set the time. The signal can
be selected between MSF and DCF77 in the
Time/Calendar setting mode (Refer to “ HOW
TO SET THE TIME/CALENDAR”). Once the watch
starts receiving the radio signal, it will take about
5 minutes until the reception attempt is
completed. When the watch successfully
receives the signal, or if it fails to receive the
signal in about 5 minutes, the watch will return
to the Time/Calendar display.
* Turn the antenna of the watch (at the 12 o’clock
position) toward the direction of the transmitter
of the selected signal to facilitate signal
reception.
* Leave the watch where it can receive radio
signals during the automatic reception period
(starting from 3:00 AM, or starting again from 4:00
AM if the reception from 3:00 AM is not
successful).
* The watch receives radio signals in the same
way as a TV or radio. Keep the watch where it
can easily receive signals, for instance, close to
a window. Keep the watch away from objects
that cause radio static.
* Please note that the watch may be unable to
receive radio signals properly under the
following conditions.
a) Inside a building, between tall buildings,
underground
b) Close to overhead power lines, TV stations,
train cables
c) Close to home electrical appliances or OA
devices such as TV’s, refrigerators, air
conditioners, air cleaners, PC’s, fax machines
d) In places generating radio interference, such
as construction sites, airports, military bases
or in heavy traffic
e) Inside a vehicle, train, or airplane
f) Close to furniture made of steel, such as a
steel desk
Checking the receiving condition during
reception
Look at the antenna mark to check receiving
conditions during radio signal reception. If the
mark is turning with parabolas, a radio signal is
being successfully received. If parabolas
appear, but soon disappear, receiving
conditions are not sufficient for successful
reception. If no parabola appears, receiving
conditions are poor, or the watch is outside the
reception range, and the watch is unable to
receive the radio signal.
Reception successful (The watch was able to
receive a signal within the last 24 hours.)
Reception within last 24 hours failed (The watch
has failed to receive a signal within the last 24
hours, but succeeded in receiving a signal
during the last 5 straight days.)
Reception failed (The watch has failed to
receive a signal for 5 straight days.)
When the buttons are released, the watch
starts receiving a radio signal.
*In such a case, the watch will starts receiving
MSF and S1 is shown on the display.
2. After the watch succeeds in receiving a
radio signal, or if it fails to receive a signal in
about 5 minutes, it will return to the Time/
Calendar display.
* To return to the Time/Calendar display manually,
press any of the buttons.
Split
Split
release
Split
Stop
Reset
Start
DC D DC
Split indicator
Split time
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lorus YK60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lorus YK60 in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info