593884
3
Zoom out
Zoom in
Previous page
1/4
Next page
Set
alarm time
C
DA
Alarm
mark
Hourly time
signal mark
Current time
1. Press button “A” to show the ALARM mode.
“ALARM” is displayed first, and then the
ALARM mode appears.
2. Press button “A” for 2 to 3 seconds to
show the alarm setting display. The hour
digits (and “AM”/“PM” mark if the time is
set in the 12-hour indication) start flashing.
3. Press button “C” to select the digits to be
adjusted (flashing).
Minutes
Hour
4. Press button “D” to set the flashing digits.
One digit is advanced with each press of
the button. Digits move quickly by keeping
button “D” pressed.
5.
After all the adjustments are completed, press
button “A” to return to the ALARM mode.
ALARM MODE
The alarm can be set to ring on a 24-hour
basis.
Notes:
1. When the time function is displayed in the
24-hour indication, the alarm is also displayed
in the 24-hour indication.
2. When setting the hour digits in the 12-
hour indication, check that AM/PM is properly
set. In the 24-hour indication, there is no
indication.
3. If the watch is left untouched in the alarm
setting display with the digits flashing, it
will automatically return to the ALARM
mode in 2 to 3 minutes.
Engagement/disengagement of the alarm
& turning on/off of the hourly time signal
With each press of button “C” in the ALARM
mode, the alarm and hourly time signal are
engaged and disengaged in the following order.
Alarm engaged
Hourly time signal engaged
Both engaged
Neither engaged
At the designated time, the alarm rings for
20 seconds and stop. To stop it manually,
press any of the buttons.
The alarm can be tested by keeping button
“C” pressed in the ALARM mode.
Checking the set alarm time
Press and hold button “D” in the TIME/
CALENDAR mode. While the button is
kept pressed, the alarm time that has been
set is displayed.
Note:
When the alarm is disengaged, the set alarm
time will not be displayed.
DUAL TIME MODE
The time of a different time zone can be
displayed.
C
D
B
A
Main time
Dual time
1. Press button “A” to show the DUAL TIME
mode. “dUAL” is displayed first, and then
the DUAL TIME mode appears.
2. Press button “A” for 2 to 3 seconds to
show the dual time setting display. The
hour digits (and “AM”/“PM” mark if the
time is set in the 12-hour indication) start
flashing.
3. Press button “C” to select the digits to be
adjusted (flashing).
Minutes
Hour
4. Press button “D” to set the flashing digits.
One digit is advanced with each press of
the button. Digits move quickly by keeping
button “D” pressed.
5. After all the adjustments are completed,
press button “A” to return to the DUAL
TIME mode.
Notes:
1. When the time function is displayed in the
24-hour indication, the dual time is also
displayed in the 24-hour indication.
2. When setting the hour digits in the 12-
hour indication, check that AM/PM is properly
set. In the 24-hour indication, there is no
indication.
3. If the watch is left untouched in the dual
time setting display with the digits flashing,
it will automatically return to the DUAL
TIME mode in 2 to 3 minutes.
NOTE ON UNUSUAL DISPLAY
While in the time/calendar setting display
with the digits flashing, the display as shown
below will appear if both buttons “C” and “D”
are pressed successively in a short time. This
is not a malfunction. Press button “A”, “C” or
“D” to return to the TIME/CALENDAR mode,
and then set the time/calendar again.
C
DA
LUMIBRITE WATCH
(dial, hands, buttons, case, bezel, strap, etc.)
If your watch is a LORUS LUMIBRITE watch,
it has following features.
LORUS LUMIBRITE watches absorb and store
light energy from natural and artificial light
sources and emit light in the dark. They are
made of environmentally friendly material,
and therefore, are harmless to human beings
and the environment.
• With a full charge, LORUS LUMIBRITE
watches glow in the dark hours longer than
conventional luminous watches of this type.
If exposed to a light of more than 500 lux
(i.e., the brightness of a typical office) for
approximately 10 minutes, or direct sunlight
for 2 minutes, they will glow for hours.
• Since LORUS LUMIBRITE watches emit
the light they store, the brightness will
decrease gradually over time. The length
of time they will glow may also differ slightly
depending on such factors as the brightness
of and distance from the light source used
to charge the watch.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lorus Y718 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lorus Y718 in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info