593867
3
Zoom out
Zoom in
Previous page
1/4
Next page
3. Depress button “B” for 2 to 3 seconds to show
the adjustable timer setting display. The hour
digits start flashing.
4. Selection of the digits to be adjusted (flashing)
is made in the following order by depressing
button “C”.
Minutes Hour
5. Depress button “D” to set the digits. One digit
is advanced with each depression of the button.
The digits move quickly by keeping the button
depressed.
6. After all the adjustments are completed, de-
press button “B” to return to the timer display.
The time you have set remains displayed.
Note: If the watch is left untouched in the adjustable
timer setting display with the digits flashing,
it will automatically return to the timer
display in 2 to 3 minutes.
Adjustable timer operation
Refer to “Preset timer operation” above.
HOW TO SET THE ALARM
The alarm can be set to ring on a 24-hour basis.
At the designated time, the display is illumi-
nated as the alarm rings.
Alarm display mark
1. Depress mode
selector “A” to show
the alarm display.
1. Turn mode selector
“A” to set “ALARM”
at the 12 o’clock
position.
2. Depress button “B” for 2 to 3 seconds to show
the alarm setting display. The alarm mark and
“on”/“- -” mark disappear and the hour digits
(and “A”/“P” mark if the time is set in the 12-
hour indication) start flashing.
3. Depress button “C” to select the digits to be
adjusted (flashing).
Hour Minutes
4. Depress button “D” to set the digits. One digit
is advanced with each depression of the button.
The digits move quickly by keeping the button
depressed.
5. After all the adjustments are completed, depress
button “B” to return to the alarm display.
The alarm mark and “on” mark are automati-
cally displayed.
Notes:
1. When the time function is displayed in the 24-
hour indication, the alarm is also displayed in
the 24-hour indication.
2. When setting the hour digits in the 12-hour
indication, check that “A”(AM)/“P”(PM) mark
is properly set. In the 24-hour indication, there
is no indication.
3. If the watch is left untouched in the alarm
setting display with the digits flashing, it will
automatically return to the alarm display in 2
to 3 minutes.
Engagement/disengagement of the alarm
With each depression of button “C” in the alarm
display, the alarm is engaged and disengaged
alternately.
Alarm disengaged
Alarm engaged
Turning on/off of the hourly time signal
and button operation confirmation sound;
and alarm test
With each depression of button “C” in the time/
calendar display, the hourly time signal and
confirmation sound for the button operation are
turned on and off alternately.
Hourly time signal and confirma-
tion sound turned on
Hourly time signal and confirma-
tion sound turned off
At the designated time, the alarm rings and the
display is illuminated alternately for 20 seconds
and stop. To stop them manually, depress/turn
mode selector “A”, or depress button “B”, “C”,
“D” or LITE button.
The alarm can be tested by keeping buttons “C”
and “D” depressed in the time/calendar display.
*After the alarm sound is tested, be sure to
check turning on/off of the hourly time signal
and confirmation sound, as they are turned on
and off alternately by depressing button “C”.
NOTE ON UNUSUAL DISPLAY
While in the time/calendar setting display, the
display as shown below will appear if both buttons
“C” and “D” are depressed at the same time. This
is not a malfunction. Depress/turn mode selector
“A”, or depress button “B”, “C”, “D” or LITE button
to return to the time/calendar display, and then
set the time/calendar again.
[All the segments lighting up]
LUMIBRITE WATCH
(dial, hands, buttons, case, bezel, strap, etc.)
If your watch is a LORUS LUMIBRITE watch, it
has following features.
LORUS LUMIBRITE watches absorb and store light
energy from natural and artificial light sources
and emit light in the dark. They are made of
environmentally friendly material, and therefore,
are harmless to human beings and the environment.
With a full charge, LORUS LUMIBRITE watches
glow in the dark hours longer than conven-
tional luminous watches of this type. If ex-
posed to a light of more than 500 lux (i.e., the
brightness of a typical office) for approximate-
ly 10 minutes, or direct sunlight for 2 minutes,
they will glow for hours.
Since LORUS LUMIBRITE watches emit the light
they store, the brightness will decrease gradually
over time. The length of time they will glow
may also differ slightly depending on such factors
as the brightness of and distance from the light
source used to charge the watch.
LORUS LITE
While LITE button is kept depressed in the time/
calendar, stopwatch, timer or alarm display, the
electroluminescent light evenly illuminates the
display for easy viewing in the dark.
Notes:
1. LORUS LITE watches work with one battery.
When the electroluminescent light begins to
lose its luminance, this is an indication that
the battery is depleted. We recommend that
you change the battery before the watch itself
stops.
2. If the electroluminescent light is used conti-
nuously for a long time, the battery life may
be less than the specified period.
BATTERY CHANGE
The miniature lithium battery SEIKO CR2025, SONY
CR2025 or Matsushita CR2025, which powers your
watch should last approximately 2 years. However,
because it is inserted at the factory, the actual life
of the battery once in your possession may be less
than 2 years.
Be sure to replace the battery to prevent any possible
malfunction as soon as it runs down. To replace
the battery, we recommend taking the watch to a
local watch repair shop.
B
“on”/“- -”
(Alarm
engagement/
disengage-
ment mark)
“A”(AM)/
“P”(PM)
mark
Alarm
mark
Current time
Hourly time
signal mark
TIME
CHRONO
TIMER
ALARM
ALARM
TIME
TIME
LITE button
D
C
Minutes
Hour
Battery Life Indicator
When the battery nears its end, all the digits of
the display start flashing. In that case, replace
the battery as soon as possible.
Notes:
1. If the stopwatch is used for more than 10 hours
a day, the timer for more than 10 hours a day,
the alarm more than once a day, the illuminating
light more than 3 times a day, the auto illumination
more than 30 times a week and/or the confirmation
sound more than 24 times a day, the battery
life may be less than the specified period.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lorus W680 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lorus W680 in the language / languages: English as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info