593845
2
Zoom out
Zoom in
Previous page
1/4
Next page
Measurement between two competitors
Split time measurement
Start
C
DCD
Split
Split release
Stop Reset
D
Finish (First runner)
C
DC D D
Finish (Second runner)
Start
Finish time
of 2nd
competitor
ResetStop
Measurement and release of split time
can be repeated by pressing button “D”.
Finish
time of 1st
competitor
HOW TO SET THE 3-CHANNEL
ALARM
1. In the alarm display, selection of the alarm
channel or hourly time signal to be engaged
or disengaged is made in the following order
by pressing button “C”.
Engagement/disengagement of the
alarm and hourly time signal
• The alarm can be set to ring at three different
times a day. Set the three alarm channels
one by one to desired alarm times.
1. Press button “A” to show the alarm display.
2. Selection of the alarm channel to be set is
made in the following order by pressing
button “C”.
* The alarm cannot be set in the hourly
time signal display.
Channel 1
Channel 2
MinutesHour
3. By pressing button “D” to set the digits in
the alarm setting display, the alarm mark
is displayed and the alarm is automatically
engaged.
4. If the watch is left untouched in the alarm
setting display with the digits flashing, it
will automatically return to the alarm display
in 2 minutes.
Notes:
1. When the time function is displayed in the
24-hour indication, the alarm is also displayed
in the 24-hour indication.
2. When setting the hour digits in the 12-
hour indication, check that “A” (AM)/“P ”
(PM) mark is correctly set. In the 24-hour
indication, “24” (24-hour indication) mark
is displayed.
2. [Alarm and hourly time signal engagement/
disengagement]
With each press of button “D”, the alarm of
the selected channel or hourly time signal
is engaged and disengaged alternately.
* The alarm and hourly time signal can be
engaged and disengaged independently
of each other.
Indication of
the alarm
channel
Alarm/hourly
time signal
engaged
Alarm/hourly
time signal
disengaged
1
2
3
(Hourly time
signal)
The alarm rings at the designated time for
20 seconds and stops. To stop it manually,
press button “A”, “B”, “C” or “D”.
The alarm can be tested by keeping button
“D” pressed in the alarm display.
Hour
Hourly time
signal mark
Alarm mark
Alarm display
indicator
Alarm channel
HOW TO SET THE DUAL TIME
Time of a different time zone can be set and
displayed together with the time you have set
in “HOW TO SET THE TIME/CALENDAR”.
1. Press button “A” to show the dual time
display.
2. Press button “B” to show the dual time
setting display.
3. To set the digits, refer to “HOW TO SET
THE TIME/CALENDAR”.
1
B
A
D
C
Minutes
“A” (AM)/“P”
(PM) mark
AD
B
C
Hour Minutes
“A” (AM)/“P”
(PM) mark
Dual time
display
indicator
Channel 3
Hourly time
signal display
3. Press button “B” to show the alarm setting
display. The hour digits (and “A”/“P”
mark if the time is set in the 12-hour indication)
start flashing.
4. Press button “C” to select the digits to be
adjusted (flashing).
5. Press button “D” to set the digits. One
digit is advanced with each press of the
button. The digits move quickly by keeping
the button pressed.
6. After all the adjustments are completed,
press button “B” to return to the alarm
display.
* To set more than one alarm channel,
follow the procedure above starting from
the step “2”.
Channel 3
Hourly time
signal display
Channel 1 Channel 2
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lorus W111 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lorus W111 in the language / languages: English as an attachment in your email.

The manual is 0,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info