593843
2
Zoom out
Zoom in
Previous page
1/3
Next page
Auto Start Function
• By setting the amount of time before measurement
is started, the stopwatch starts automatically
at a desired time.
• Up to 15 minutes and 59 seconds can be set
in seconds.
Note: The auto start function and timer cannot
be used simultaneosly.
1) Auto start time setting
3. If the watch is left untouched in the alarm
setting display with the digits flashing, it
will automatically return to the alarm display
in 2 minutes.
1
2
3
4
Hourly time
signal mark
With each press of button “B” in the alarm
display, the engagement and disengagement
of the alarm and hourly time signal are
made as follows.
Engagement/disengagement of the
alarm and hourly time signal
HOW TO SET THE DUAL TIME
Time of a different time zone can be set and
displayed together with the time you have set
in “HOW TO SET THE TIME/CALENDAR”.
• At the designated time, the alarm rings
and the display is illuminated for 20 seconds
and stops. To stop them manually, press
button “A”, “B” or “C”.
The alarm can be tested by keeping button
“C” pressed in the alarm display.
Neither engaged
Alam engaged
Both engaged
Hourly time signal engaged
Alarm mark
B
C
Dual time
display mark
“A” (AM)/“P”
(PM) mark
Hour
Minutes
A
1. Press button “A” to show the time/calendar
display.
2. Press button “B” to show the dual time
display. With each press of the button,
the display changes over between the time/
calendar and dual time alternately.
3. Press button “A” for 2 seconds to show the
dual time setting display.
4. To set the digits, refer to “HOW TO SET
THE TIME/CALENDAR”.
1. After stopping the stopwatch or resetting
it, press button “A” for 2 seconds to show
the auto start time setting display. The
minute digits start flashing.
2. Press button “B” to select the digits to be
adjusted (flashing).
Minutes Seconds
3. Press button “C” to set the flashing digits.
One digit is advanced with each press of
the button. The digits move quickly by
keeping the button pressed.
4. After all the adjustments are completed,
press button “A” to show the auto start
display. The auto start time you have set
remains displayed in the upper row.
Note: If the watch is left untouched in the auto
start time setting display with the digits
flashing, it will automatically return to
the auto start display in 2 minutes.
B
C
A
SecondsMinutes
2) How to use the auto start function
Stopwatch
measurement
Auto start time
(countdown)
B
1. Press button “B” in the auto start display.
The countdown of the set time will be
started. With each press of the button,
the countdown is started and stopped alternately.
The stopwatch starts measuring when the
set time is up.
* At 3, 2 and 1 minutes, 30, 20, 10, 3, 2 and
1 seconds before the stopwatch measurement
is started, a beep sounds and the light
illuminates.
2. After the stopwatch is started, operate the
buttons as explained in “Stopwatch Operation”.
1. Press button “A” to show the alarm display.
2. Press button “A” for 2 seconds to show the
alarm setting display. The hour digits
(and “A”/“P” mark if the time is set in the
12-hour indication) start flashing.
3. Press button “B” to select the digits to be
adjusted (flashing).
Notes:
1. When the time function is displayed in the
24-hour indication, the alarm is also displayed
in the 24-hour indication.
2. When setting the hour digits in the 12-
hour indication, check that “A” (AM)/“P ”
(PM) mark is correctly set. In the 24-hour
indication, there is no indication.
HOW TO SET THE ALARM
B
Alarm display markMinutesHour
A
C
“A”(AM)/
“P” (PM)
mark
Hourly time
signal mark
Alarm
mark
4. Press button “C” to set the digits. One
digit is advanced with each press of the
button. The digits move quickly by keeping
the button pressed.
5. After all the adjustments are completed,
press button “A” to return to the alarm
display.
MinutesHour
Two types of timers (adjustable timer and
preset timer) are available.
1. How to Use the Preset Timer
Five different lengths of time (3, 10, 15, 30
and 45 minutes) have been preset for the
timer.
Selection of the preset time
1. Press button “A” to show the timer display.
2. Press button “C” to select the desired preset
time. Selection of the preset time is made
in the following order by pressing button
“C”.
15 min.30 min.45 min.
10 min.3 min.
Preset timer operation
Press the button in the following order.
Time-up
Stop
Restart
Warning
sound
beeps
Start
Restart and stop of the
timer can be repeated by
pressing button “B”.
B
BB
C
B
A
Adjustable
timer
Timer display
mark
Hour
Minutes
HOW TO USE THE COUNTDOWN
TIMER
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lorus W100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lorus W100 in the language / languages: English as an attachment in your email.

The manual is 0,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info