757006
87
Zoom out
Zoom in
Previous page
1/108
Next page
89
User Manual
Deleting Target (Advanced Mode) : place cursor on Target + 'ENTER' + 'DELETE' + 'ENTER'
TD = Time Difference
Loran-C positions are determined by precise timing of the intervals between reception of pulses trans-
mitted by pairs of stations in the selected chain. Between any two stations a ship must be located
somewhere along a line of possible positions where the measured Time Difference, TD, between ar-
rival of pulses from those stations would be observed. The TD is measured from the time of reception
of the master station signal to the time of reception of the slave station signal.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "NAVIGATE" + 'ENTER' + "COORDINATE
SYSTEM" + 'ENTER' + "TD" + 'ENTER'
Temperature (Unit)
Sets the temperature unit among C and F. The default setting is C.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "TEMPERATURE" + 'ENTER'
Tide
The periodic rise and fall of the surface of oceans, bays, etc., due principally to the gravitational interac-
tions between the Moon and Earth.
Tide Info
The Tide Info feature is the combination of a new tide heights database that will be included within
new C-CARDs and new features which calculate the tide graph for all primary and secondary ports
world-wide. This function can calculate the tide heights for any past or future date and as a by-product
of this calculation will also display the Maximum and Minimum Tide height and time for the day
selected plus the times of Sunrise and Sunset. At some chart levels, the chartplotter will display a new
Tide Diamond Symbol for every Port or tide point in the database covered by that particular C-CARD.
Tide Stations
Finds the nearest Tide Stations (up to 10) on the map, from the boat position - if a valid fix is received
- or from the cursor position - if the fix position is not good.
'MENU' +"FIND" + 'ENTER' + "TIDE STATIONS" + 'ENTER'
Tides & Currents
Turns On/Off the displaying of Tides and Currents. The default setting is On.
'MENU' + "MAP SETTINGS" +'ENTER' + "Other Map Configurations" + 'ENTER' + "Tides & Cur-
rents" + 'ENTER'
Tide & Currents
The new worldwide database with tidal stream information is now available with MAX C-CARDs.
When data/time is available, Tidal stream arrows are shown on the charts, indicating the direction and
strength of the Tide.
Fig. 5g - Tides & Currents
If no data/time is available from the GPS or the chart plotter is not in Simulation mode, the icon on the
map is generic one.
The colour of the arrow denotes the strength of the current as follows:
87


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lorenz STARLIGHT PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lorenz STARLIGHT PRO in the language / languages: English as an attachment in your email.

The manual is 3,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info