757006
74
Zoom out
Zoom in
Previous page
1/108
Next page
76 User Manual
nominal range, the light of the Nav-Aid will start blinking.
'MENU' + "MAP SETTINGS" +'ENTER' + "Dynamic Nav Aids" + 'ENTER'
Display Mode
To simplify the customization of the chart display, the map settings are now re-organized in modes
allowing the user to choose the preferred setting. Pre-programmed settings are user selectable from
Full, Medium, Low, Radar, Tides, Custom. The default setting is Custom.
'MENU' + "MAP SETTINGS" +'ENTER' + "Other Map Configurations" + 'ENTER' + "Display Mode"
+ 'ENTER'
Distance (Track)
When the tracking function is On and the type of track storing is Distance, you can store a fix when the
distance from its last stored position is greater than a defined distance. Choose in the range 0.01, 0.05, 0.1,
0.5, 1.0, 2.0, 5.0, 10.0 Nm (the distance unit is selected by the user). The default setting is 0.01 Nm.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' + "DISTANCE" + 'ENTER'
Distance (Unit)
Sets the distance unit among Nm = nautical miles, Sm = status miles e Km = kilometers. The default
setting is Nm.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "DISTANCE" + 'ENTER'
DTG = Distance To Go
The actual distance to reach the Target.
EBL = Electronic Bearing Line
Dotted line with direction selectable by the user (see Par. 4.3).
Select Advanced Mode + 'ENTER' + "EBL & VRM" + 'ENTER'
Echosounder AVAILABLE ONLY IF THE CHARTPLOTTER IS CONNECTED TO THE
VOICE NAVIGATION SYSTEM
Enables (On) or disables (Off) the Echosounder C-Voice mode. If it is On, the Depth message is spo-
ken. The message is spoken if a valid depth data is received by the chartplotter or if it is in Simulation
mode. The default setting is Off.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "C-VOICE" + 'ENTER' + "ECHOSOUNDER" + 'EN-
TER'
Event
User point that refers to the ship's position. It is simply a way of marking where the boat is (see Par.
4.2). An existing Event can be connected to the current route.
Inserting Event: 'CLEAR' + 'EVENT'
Deleting Event (Advanced Mode): Place cursor on Event + 'ENTER' + "DELETE" + 'ENTER'
Deleting Event (Basic Mode): Place cursor on Event + 'CLEAR'
Editing Event: Select Advanced Mode + Place cursor on Event+ 'ENTER' + "EDIT"+ 'ENTER' + Modify
Symbol, Name, Color + 'CLEAR'
Add to Route: Select Advanced Mode + Place cursor on Event+ 'ENTER' + "ADD TO ROUTE" + 'EN-
TER'
External Alarm
Allows triggering an external alarm device. You can enable (On) or disable (Off) the External Alarm.
The default setting is On.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ALARMS" + 'ENTER' + "EXTERNAL ALARM"
+ 'ENTER'
External Waypoint
The coordinates of a Waypoint, received from a GPS or a LORAN connected to the chartplotter, can
be stored into the chartplotter, if the GPS or the Loran are NMEA-0183 protocol compatible and
support the $BWC sentence (this symbol remains on the screen for 30 seconds). You may save it by
placing a Waypoint or a Mark onto that symbol. As soon as the chartplotter receives another $BWC
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lorenz STARLIGHT PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lorenz STARLIGHT PRO in the language / languages: English as an attachment in your email.

The manual is 3,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info