757006
68
Zoom out
Zoom in
Previous page
1/108
Next page
70 User Manual
Advanced Mode
The chartplotter can operate in two different modes: Basic Mode and Advanced Mode. In Advanced
Mode it is possible to have more available functions, for example it is possible to handle Waypoints.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "ADVANCED FUNCTIONS" + 'ENTER' + "On" + 'ENTER'
Advanced Settings (menu)
Selects the Setup, Fix, Navigate, Track, Compass, Alarms, Simulation, Route menus and the User
Points page and User C-Cards menu.
'MENU' + "ADVANCED SETTINGS" + 'ENTER'
Alarms (menu)
Sets the desired value for the Arrival Alarm, XTE Alarm, Anchor Alarm, Depth Alarm, External
Alarm. Also you can set the preferred value for the Grounding Alarm, Grounding Alarm Range,
Grounding Alarm Report.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ALARMS" + 'ENTER'
Alter = Alternate Solution
Turns On/Off the Alternate Solution in the chain. The default setting is Off.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "NAVIGATE" + 'ENTER' + "COORDINATE
SYSTEM" + 'ENTER' + "TD" + 'ENTER' + "Alter" + 'ENTER'
Altitude (Unit)
Sets the altitude (altitude of GPS Antenna on the medium sea level) unit among Ft = Feet, FL = Flight
Level and Mt = Meters. The default setting is Ft.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "ALTITUDE" + 'ENTER'
Anchor Alarm
This function allows inserting of the limit of anchor dragging: beyond that, the alarm is activated. The
chartplotter computes the distance between the current GPS position and the GPS position saved at
the activation of the anchor alarm in the menu. If the computed distance exceeds the value set in the
menu, the chartplotter shows the alarm message and starts the acoustic alarm. The default setting is
Off.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ALARMS" + 'ENTER' + "ANCHOR ALARM" +
'ENTER'
Arrival Alarm
Specifies the radius of a circle around the Waypoint of a route: when your vessel reaches this circle the
alarm sounds. You can disable (Off) the Arrival Alarm or insert value. The default setting is 1.00 Nm.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ALARMS" + 'ENTER' + "ARRIVAL ALARM" +
'ENTER'
Arrival Time
The estimated time of day you will reach your destination, based on your current speed and track from
GPS.
Attention Areas
Enables (On) or disables (Off) the displaying of the Attention Areas (areas in which special attention by
the mariner is required, because of natural or man-made hazards, or sailing regulations and restric-
tions). Moreover a special symbol (!) is placed inside the area selecting On. This is valid also for the
categories: FISHING FACILITY, MARINE FARM/CULTURE, MILITARY PRACTICE AREA,
RESTRICTED AREA, SEAPLANE LANDING AREA. When the area is small, it is identified only
by the boundary. The default setting is Contour.
'MENU' + "MAP SETTINGS" +'ENTER' + "Other Map Configurations" + 'ENTER' + "Attention Ar-
eas" + 'ENTER'
Auto Info
The type of Automatic Info is user selectable. The possible settings are: Off: disabled, no automatic info
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lorenz STARLIGHT PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lorenz STARLIGHT PRO in the language / languages: English as an attachment in your email.

The manual is 3,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info