757006
62
Zoom out
Zoom in
Previous page
1/108
Next page
64 User Manual
'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' +
"C-LINK" + 'ENTER' + "Primary Station" + 'ENTER'
Master mode is the default factory setting. All regular chart plotters’ functions are
allowed.
As soon as the Destination is placed, the master chart plotter will start trans-
mitting all c-link navigation data. In Master mode the C-Link navigation data re-
ceived from the NMEA port is ignored. So, if the two chart plotters are both operat-
ing in Master mode, the C-Link navigation data sent by the other Chart Plotter
never processed. Under such condition if the navigation is activated on one of the
two Chart Plotters, a warning message will be shown to notify that the C-Link
navigation data will be ignored by the other Chart Plotter.
4.8.1.4 Slave Chart Plotter
Operating mode
To select the Slave mode (Secundary Station) follow the procedure:
'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' +
"C-LINK" + 'ENTER' + "Secundary Station" + 'ENTER'
When Slave mode is set, the chart plotter cannot manipulate the C-link navigation
data anymore.
Stop current navigation
If the navigation was already active, it will be disabled as soon as Slave mode is set.
An appropriate warning message will be shown to notify that the Navigation is
already active and to confirm whether Slave mode can be set.
Inhibit Navigation operation
As soon as Slave mode is set, the destination cannot be placed anymore either the
C-link navigation data is received from the Master or not. Also, when the C-link
navigation data is received from the Master, it will not be allowed to deactivate the
Navigation.
Inhibit Route following
While navigating to the route received from the Master the destination is reached
(either applying distance or perpendicular criteria), the destination will not be moved
to the next waypoint on the route.
MOB handling
If the Navigation to the external destination is active and the the MOB key is pressed
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lorenz STARLIGHT PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lorenz STARLIGHT PRO in the language / languages: English as an attachment in your email.

The manual is 3,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info