757007
74
Zoom out
Zoom in
Previous page
1/110
Next page
76 User Manual
Selecting Active Route: 'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ROUTE" + 'ENTER' +
"REPORT" + 'ENTER' + "ROUTE #" + 'ENTER'
Inverting Route: 'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ROUTE" + 'ENTER' + "RE-
PORT" + 'ENTER' + "INVERT" + 'ENTER'
Deleting Route: 'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ROUTE" + 'ENTER' + "RE-
PORT" + 'ENTER' + "CLEAR" + 'ENTER'
Selecting Speed: 'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ROUTE" + 'ENTER' + "RE-
PORT" + 'ENTER' + "SPEED" + 'ENTER' + insert value
Selecting Fuel: 'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ROUTE" + 'ENTER' + "REPORT"
+ 'ENTER' + "FUEL" + 'ENTER' + insert fuel
Route Reverse
Reversing a route plan is most typically used to return to the point where the route originally started.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ROUTE" + 'ENTER' + "INVERT" + 'ENTER'
Save (file)
Saves file on User C-CARD:
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "USER C-CARD" + 'ENTER' + "SAVE" + 'ENTER'
Seabed Type
Enables (On) or disables (Off) the displaying of the Seabed Type.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "MAP SETTING" + 'ENTER' + "CUSTOMIZE
MAP" + 'ENTER' + "MARINE SETTINGS" + 'ENTER' + "SEABED TYPE" + 'ENTER'
Setup (menu)
Turns On/Off the Beeper, External Waypoint; selects the desired setting for Palette, Time Reference,
Time Format, Date Format, Wind Speed, Auto Info and Ship Icon Mode.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "SETUP" + 'ENTER'
Ship Icon Mode
Sets the ship icon as Steady or Blinking. The default setting is Blinking.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "SETUP" + 'ENTER' + "SHIP ICON MODE" +
'ENTER'
nSimulation
Used in order to use your chartplotter without input data. It generates a display with a moving vessel,
so that you can practice using the controls in safety.
Simulation (menu)
Enables (On)/disables (Off) Activate Simulation; it is possible to insert desired values for Speed, Head-
ing, Date and Time and selects the Cursor Control function.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "SIMULATION" + 'ENTER'
nSNR = Signal to Noise Ratio
The ratio of the magnitude of a signal that of the noise (interference).
nSOG = Speed Over Ground
A calculation of the rate of movement of the ship over the ground.
nSpeed
The current velocity at which you are travelling, relative to a ground location.
Speed Filter
Turns On/Off the Speed Filter. When it is On, you can filter the speed of the ship, to optimize it. The
default setting is Off.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "FIX " + 'ENTER' + "SPEED FILTER" + 'ENTER'
Speed (Simulation)
Sets the value for speed in the Simulation mode. The default setting is 01.0 Kts.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "SIMULATION" + 'ENTER' + "SPEED" + 'ENTER'
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lorenz STARLIGHT PLUS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lorenz STARLIGHT PLUS in the language / languages: English as an attachment in your email.

The manual is 6,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info