757007
65
Zoom out
Zoom in
Previous page
1/110
Next page
67
User Manual
Enables (On) or disables (Off) the Echosounder Voice mode. If it is On, the Depth message is spoken.
The message is spoken if a valid depth data is received by the chartplotter or if it is in Simulation mode.
The default setting is Off.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "VOICE" + 'ENTER' + "ECHOSOUNDER" + 'ENTER'
Event
User point that refers to the ship's position. It is simply a way of marking where the boat is (see Par.
4.2).
Inserting Event: Select Advanced Mode + 'MODE' + 'ENTER' + "EVENT" + 'ENTER'
Deleting Event (Advanced Mode): Place cursor on Event + 'ENTER' + "DELETE" + 'ENTER'
Deleting Event (Basic Mode): Place cursor on Event + 'CLEAR'
Editing Event: Select Advanced Mode + Place cursor on Event+ 'ENTER' + "EDIT"+ 'ENTER' + Modify
Symbol, Name, Color + 'CLEAR'
External Waypoint
The coordinates of a Waypoint, received from a GPS or a LORAN connected to the chartplotter, can
be stored into the chartplotter, if the GPS or the Loran are NMEA-0183 protocol compatible and
support the $BWC sentence (this symbol remains on the screen for 30 seconds). You may save it by
placing a Waypoint or a Mark onto that symbol. As soon as the chartplotter receives another $BWC
sentence with the coordinates of a new Waypoint, the symbol moves to the new point. The default
setting is Off.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "SETUP" + 'ENTER' + "EXTERN WPT" + 'ENTER'
nFile
It is a collection of information (of the same type) stored on a User C-CARD. Each file must have a
unique name, ideally one that describes its contents. Filenames are kept in a directory on each User C-
CARD (see Par. 4.6).
Filter Dump
Sets the Filter step. Move cursor key up/down to insert value in the range [500 - 12000], move it to the
left/right to move the cursor, press 'ENTER'. A bigger value means on heavy filter and it is applied to
both position and speed filter. The default value is 500.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "FIX" + 'ENTER' + "FILTER DUMP" + 'ENTER'
Find
The chartplotter allows finding Nearest Services, Port By name, Tide Stations, Wrecks, Obstructions.
'MENU' + "FIND" + 'ENTER'
Fix (menu)
Turns On/Off the Dead Reckoning, Fix Correction, the Position Filter and the Speed Filter, enables
the Compute Correction and Correction Offset functions, sets the desired value for Filter Dump and
Static Navigation
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "FIX" + 'ENTER'
Fix Correction
Turns On/Off the Correction from the positioning system. If the new Correction is calculated, but the
Correction is not enabled, the ship's position is not changed. The default setting is Off.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "FIX" + 'ENTER' + "FIX CORRECTION" + 'ENTER'
Fix Datum
Selects the Fix Datum among 130 items. WGS 1984 is the default Fix Datum.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "NAVIGATE" + 'ENTER' + "FIX DATUM" + 'ENTER'
Formatting
The formatting of a User C-CARD must be done before using a new User C-CARD: this operation
prepares the User C-CARD to receive and store information. Before you start the formatting proce-
dure, insert a new User C-CARD into the slot. Be sure to label it; the label will remind you that you
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lorenz STARLIGHT PLUS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lorenz STARLIGHT PLUS in the language / languages: English as an attachment in your email.

The manual is 6,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info