757007
62
Zoom out
Zoom in
Previous page
1/110
Next page
64 User Manual
Customize Map (menu)
This function allows the user to customize the following selections and is divided into the following
setting menus: Marine Settings, Depth Settings, Land Settings and Chart Settings.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "MAP SETTING" + 'ENTER' + "CUSTOMIZE
MAP" + 'ENTER'
Date (simulation)
Sets the date of the simulated fix.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "SIMULATION" + 'ENTER' + "DATE" + 'ENTER'
Date Format
Sets you preferred date between MM-DD-YY (month-day-year) and DD-MM-YY (day-month-year).
The default setting is MM-DD-YY.
''MENU' + "ADVANCED SETTINGS" + 'ENTER' + "SETUP" + 'ENTER' + "DATE FORMAT" + 'ENTER'
nDatum
The Latitude and Longitude lines printed on any map are based on certain models of the shape of the
earth: these models are called Datum or Coordinate Systems. There are many different Datum in use,
each one gives different Lat/Lon positions for an identical point on the surface of the earth.
Dead Reckoning
Enables (On) or disables (Off0 the Dead Reckoning. The default setting is Off.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "FIX" + 'ENTER' + "DEAD RECKONING" +
'ENTER'
Declutter
Turns On/Off. When it is On removes overlapping text (e.g. Names, Spot Soundings etc.). The default
setting is Off.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "MAP SETTING" + 'ENTER' + "CUSTOMIZE
MAP" + 'ENTER' + "CHART SETTINGS" + 'ENTER' + "DECLUTTER" + 'ENTER'
nDefault
Indicates a value or a setting which is used if the user has not defined a particular value. You can modify
this value using the menu settings.
Delete (file)
Deletes file from User C-CARD:
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "USER C-CARD" + 'ENTER' + "DELETE" + 'ENTER'
Delete (route)
To delete the selected route.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ROUTE" + 'ENTER' + "DELETE ROUTE" +
'ENTER' + "YES" + 'ENTER'
Delete (Track)
To clear the stored track.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' + "DELETE" + 'ENTER' +
"YES" + 'ENTER'
Delete Selection (Track)
To clear the selected track.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' + "DELETE SELECTION"
+ 'ENTER'
Depth (Unit)
Sets the depth units among Ft = Feet, FM = Fathoms and Mt = Meters. The default setting is Ft.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "DEPTH" + 'ENTER'
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lorenz STARLIGHT PLUS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lorenz STARLIGHT PLUS in the language / languages: English as an attachment in your email.

The manual is 6,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info