522476
137
Zoom out
Zoom in
Previous page
1/157
Next page
139
User Manual
problems with your chart plotter, the extended auto-test should help determine the
problem. Make sure the chart plotter is turned Off. While pressing and holding any
other key, turn the chart plotter On. A new menu will appear on the display:
Software name
and version
NT Software
Library version
and date
XXXX V. x.yy
NTSL V.x.yy.zz R [gg/mm/yyy]
Modem Test
Softwarename
andversion
NTSoftware
Libraryversion
anddate
XXXXV.x.yy
NTSLV.x.yy.zzR[gg/mm/yyy]
ModemTest
Fig. 7.6 - System Test
Use the cursor key to select the preferred test: this will display in reverse
video and with the relative menu window. To choice the test press 'ENTER'. To
exit from any submenu press 'CLEAR'. To exit from the System Test turn Off the
chart plotter.
7.6.1 RAM MENU
This test verifies the integrity of the memories and if preferred during this
test all the internal memory can be erased and the default setting restored.
RAM Test
To verify the integrity of the RAM. If on the screen the message "ERROR"
appears, the RAM is physically damaged.
RAM Clear
To clear internal memory. If the chart plotter exhibits unusual behavior, or appears
to be malfunctioning, it may be possible to correct the problem by clearing RAM.
This operation will erase all Marks, Events, Routes, stored track plots and desti-
nations. It will also return all selections (Input Data Format, Autopilot selection,
etc.) to original default values. To confirm to clear RAM press 'ENTER' again
(but if at this time you do not wish to clear RAM press 'CLEAR').
7.6.2 DIM MENU
To select the preferred value for contrast and backlight.
Contrast
Each time you pressed the cursor key to right, the screen will decrease brightness,
137


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lorenz PANORAMIC 8 HD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lorenz PANORAMIC 8 HD in the language / languages: English as an attachment in your email.

The manual is 3,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info