522479
38
Zoom out
Zoom in
Previous page
1/157
Next page
40
User Manual
3.2.8 INPUT/OUTPUT MENU
WARNING !!!
After every software upgrade the RAM is cleared and the chart plotter re starts with the usual
default settings. Please go to the Input/Output menu and set the proper input format once again.
3.2.8.1 Port 1/Port 2/Port 3/Port4*/Port5* Input
Sets or disables the format for the navigation data input serial Port1/2/3/4*/
5*. The default setting is NMEA-0183 4800-N81-N. For example to set the Port 2 as
NMEA-0183 (4800 Baud Rate, Parity None, 8 Bits Number, 1 Stop Bit and Normal
Polarity) you must select:
'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' +
"PORT 2 INPUT" + 'ENTER'+ "NMEA-0183 4800-N81-N" + 'ENTER'
Note
The port selection for C-COM or BBFF (Fish Finder) system defines on which Port (in Input or
Output) are to be connected the two systems. It is important to remark that this setting affects the
Input and the Output of the selected Port. If the C-COM or BBFF (Fish Finder) was already
assigned to one Port and the user tries to set the C-COM or BBFF (Fish Finder) to another port,
the chart plotter will show a message that warns the user about the current settings and asks if the
new settings should overwrite the previous ones.
Note*
Only for PANORAMIC 8 HD/8 HD Fish and COMPACT 8 HD/8 HD Fish.
3.2.8.2 Port 1/Port 2/Port 3/Port4*/Port5* Output
Sets or disables the output interface. The default setting is NMEA-0183 4800-
N81-N. For example to set the Port 2 as NMEA-0180 you must select:
'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' +
"PORT 2 OUTPUT" + 'ENTER'+ "NMEA-0180" + 'ENTER'
Note
Selecting NMEA-0180 or NMEA-0180CDX the chart plotter shows a message to advise the user
that the related input will be disabled.
Note*
Only for PANORAMIC 8 HD/8 HD Fish and COMPACT 8 HD/8 HD Fish.
3.2.8.3 Port 1/Port 2/Port 3/Port4*/Port5* NMEA Output Messages Selection
The chart plotter allows customizing the NMEA-0183 sentence transmitted
on each port. The default setting is GLL, VTG, XTE, RMB, RMC, APB On and
BOD, BWC, RMA, WCV, GGA, HSL, HDG Off.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' +
"PORT 1/2/3/4*/5* OUTPUT SENTENCES" + 'ENTER'
Note*
Only for PANORAMIC 8 HD/8 HD Fish and COMPACT 8 HD/8 HD Fish.
3.2.8.4 GPS Setup Menu
It is possible to set the your preferred configuration for the connected GPS.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lorenz PANORAMIC 8 HD FISH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lorenz PANORAMIC 8 HD FISH in the language / languages: English as an attachment in your email.

The manual is 3,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info