757004
117
Zoom out
Zoom in
Previous page
1/124
Next page
119
User Manual
6.5.4 SERIAL PORTS
If you are having problems receiving data from the position-finding instru-
ment, this test should help determine the problem.
Change Parameters
To change the parameters of the serial interface. This menu allows to select the
Port 1, 2, 3, the Baud Rate between 4800 or 9600, the Data Bits (Word Length)
between 7 or 8, the Parity between even, odd or none, the Stop Bits between 1
or 2. Default settings are: Port = Port2, Baud Rate = 4800, Data Bits = 8, Parity
= none, Stop Bits = 1.
Input Data Display
To allow the chart plotter to act as a computer terminal and display the incoming
data exactly as it received. If the data displayed on the screen is unrecognizable,
you may have selected the wrong input parameters for your particular receiver.
Check your receiver manual to be sure that you have selected the proper inter-
face format. If the screen is blank, you may have a broken connection, and no
data is being received. Use 'ZOOM IN' to stop (or continue after pause) data
displaying, 'ENTER' to show data in hex or ASCII mode (normal or small) and
'CLEAR' to exit.
6.5.5 EXTERNAL ALARM
To check if the External Alarm has been transmetted.
6.5.6 DISPLAY SETTINGS
To select the display resolution.
Resolution
Sets the resolution among: 1024x768, 800x600, 640x480 (default).
117


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lorenz MAGNUM PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lorenz MAGNUM PRO in the language / languages: English as an attachment in your email.

The manual is 3,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info