756999

Lorenz EXCALIBUR 7 Speed Manual

102
Zoom out
Zoom in
Previous page
1/112
Next page
104 User Manual
Fig.A.1 - Pictures and Diagrams
OSGB = Ordnance Survey of Great Britain
A coordinate system describing only Great Britain. Generally used with GBR36 datum, which also
describes only Great Britain. This coordinate system cannot be used in any other part of the world.
Port Info
The Port Info function is a combination of a new Port Info database containing all the relevant Safety
and Navigational information normally found in good pilot books and a new presentation software
which displays special Port Facility Symbols.
Ports & Services
Areas along shore with facilities for mooring, downloading and uploading of ships, generally sheltered
from waves and winds. Port installations are piers, wharves, pontoons, dry docks, cranes... .
Route
Sequence of Waypoints connected by segments. Among the available Routes, only one is the active
Route, which is shown by a straight line and arrows to indicate the direction.
RTCM = Radio Technical Commission for Maritime Services
The data format created by the Radio Technical Commission Maritime to transmit Differential GPS
corrections.
SOG = Speed Over Ground
A calculation of the rate of movement of the ship over the ground.
Speed
The current velocity at which you are travelling, relative to a ground location.
Spot Sounding
Depth of the water in a specific and charted position
STR = Steering
The difference between COG and CTS. If COG is 25° and CTS is 30°, then STR is 5° Right.
Target
In order to tag on the chart the point, towards which the ship is Heading, you can use a special mark,
called Target. When the Target is placed, all navigation data are referred to this Target.
TD = Time Difference
Loran positions are determined by precise timing of the intervals between reception of pulses transmit-
ted by pairs of stations in the selected chain. Between any two stations a ship must be located some-
where along a line of possible positions where the measured Time Difference, TD, between arrival of
pulses from those stations would be observed. The TD is measured from the time of reception of the
master station signal to the time of reception of the slave station signal.
Tide
The periodic rise and fall of the surface of oceans, bays, etc., due principally to the gravitational interac-
tions between the Moon and Earth.
… 102 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lorenz EXCALIBUR 7 Speed at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lorenz EXCALIBUR 7 Speed in the language / languages: English as an attachment in your email.

The manual is 3,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info