522471
22
Zoom out
Zoom in
Previous page
1/152
Next page
24 User Manual
2.3 CHANGING KEYPAD BACKLIGHT AND CONTRAST
Press and immediately release the right side of 'POWER' (do not press and hold
the key, or the "power-off" message will be displayed!): the backlight increases. Repeat this
operation the backlight decreases.
Press and immediately release the left side of 'POWER': the contrast increases.
Press and immediately release the left side of 'POWER' the contrast decreases. In other
words, first pressure of the key will increase the value till you keep it pressed, next pressure
of the key will decrease the value till you keep it pressed.
Warning!!!
At low temperatures the CCFL backlight may not glow properly. Allow a few minutes to warm up.
2.4 SELECTING THE USER INTERFACE LANGUAGE
It is possible to set the language to display menus, data pages, warning/alarm
messages, full/quick info, list of objects found by find/nearest function, and on charts
(such as place's names, buoy's names and so on). The default setting is Italian.
To select the language you want:
'MENU' + "BASIC SETTINGS" + 'ENTER' + "LANGUAGE" + 'ENTER'
Choose the language you prefer and press 'ENTER' to confirm.
Note
If the selected language is not available on cartographic data, English language is used instead.
WARNING !!!
If you have accidentally selected an incomprehensible language, and you don't be able to reselect your language (the
above procedure is not of help to you), follow this procedure: press 'MENU', move the cursor to highlight the third
selection (starting from the top) which corresponds to the Basic Settings menu and press 'ENTER'. Then a window
appears with "Language" message, press 'ENTER'; now select your language and press 'ENTER' again.
Anyway if you in trouble, see Chapter "System Test" for a RAM Clear operation: the chart plotter will also return
all selections, in particular language, to original default values.
2.5 EXTERNAL CONNECTIONS
2.5.1 GPS CONNECTION F
OR
S
KY
X7 & S
KY
X7
FISH
Connect the GPS : see the picture in Fig. 2.5.1 e Fig. 2.5.1a.
Control the input setting following the procedure:
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lorenz COMPACT X7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lorenz COMPACT X7 in the language / languages: English as an attachment in your email.

The manual is 2,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info