757260
81
Zoom out
Zoom in
Previous page
1/772
Next page
81
Quartz chronographs L440
Adjusting the time and stop seconds
Unscrew the crown if necessary.
To synchronise the watch with an ofcial time signal (radio, telephone,
etc.), pull the crown to its furthest position 3, at the moment when
the small seconds hand is at 60, then push the crown back in again
to position 1 at the time signal, and screw in.
The calendar changes every time the hour hand passes midnight.
Minute and seconds adjustment
After unscrewing the crown (if necessary) and pulling it to its furthest
position 3, the 3 counter hands will move to the midday position. Turn
the crown to correct the hour and minute hands. Turn the crown
either way to correct the minute. Then push the crown back in again
to position 1, and screw in.
Changing the time zone and the date
Unscrew the crown (if necessary), and pull it out to the intermedi-
ate position 2. The hour hand will make one-hour jumps, enabling
quick time zone adjustments. The hour hand can be moved in either
direction without affecting the minute and seconds hands. Turning
the crown through 24 hours will cause a date change. The crown
be turned either way. Then push the crown back in again to position
1, and screw in.
Chronograph functions
Standard Start-Stop function
Simple time measurement – Timing 100metres.
ADD function (partial times)
Adds several times together – Timing periods of a hockey match or
a stage race, for instance.
Split function (intermediate times)
This function is used to time intermediate race lap times in a single
event. Intermediate times are accumulated throughout the event.
Standard Start-Stop function
Used for timing a single event:
Press push-piece A : to start the chronograph.
Press push-piece A : to stop the chronograph.
Press push-piece B : to return to zero.
ADD Rally function (partial times)
Used for measuring successive events, but not the intervals between
them. Each result is automatically added to the preceding one. To
time the various stages of a car rally, for example:
At the start of the rst stage, press push-piece A to start the
chronograph.
At the start of the rst stage, press push-piece A again and the
chronograph will stop to 1/100th of a second.
Repeat this procedure for each stage of the rally.
At the end of the nal stage the chronograph will show the total
time of the rally, in other words, the accumulated time for all
the stages.
Press push-piece B to return to zero.
Book_I.indb 81Book_I.indb 81 27.01.20 09:4727.01.20 09:47
81


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Longines L636 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Longines L636 in the language / languages: All languages as an attachment in your email.

The manual is 68,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Longines L636

Longines L636 User Manual - Dutch - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info