757277
15
Zoom out
Zoom in
Previous page
1/35
Next page

CALIBRE L441
3-POSITION CROWN
Simple function
In this function, with the crown stem in position
1
,push-piece
is used to switch the chronograph status between
START and STOP.
After START is pressed, the counter hands will show the mea-
sured time. The 1/100th of a second counter hand will not turn.
WhenSTOPispressed,the60-secondcounterhandwillstop
running. The 1/100th of a second counter hand will move to
show the one hundredths of a second value.
Tomeasure another time, press push-piece
to return the
counters to zero (RESET). All the hands will quickly return
clockwise to their start point, and the chronograph will switch
back to watch mode.
Time setting and stop seconds
Tosynchronisethewatchwithanofcialtimesignal
(radio,telephone,etc.),pullthecrownstemout
to its furthest position
3
, when the small seconds hand
isat60,thenpushthe crown fully back in again (pos.
1
)at
the time signal.
Thecalendarchangeseverytimethehourhandpasses
midnight.
Minute and seconds adjustment
Pull the crown out to its furthest position
3
; the 3 counter
hands will move to 12 o'clock. Turn the crown stem to correct
thehourandminutehands.Turnthecrownstemeitherwayto
correct the minute.
Thenpushthecrownfullybackinagain(pos.
1
).
Changing the time zone and the date
Pull the crown out to the intermediate position
2
. The hour hand
will make one-hour jumps, enabling quick time zone adjust-
mentsbyturningthecrown.Thehourhandcanbemovedin
either direction without affecting the minute and seconds hands.
Turning the crown through 24 hours will change the date. The
crown stem can be turned either way. Then push the crown
fullybackinagain(pos.
1
).
Chronograph functions
Standard Start-Stop function.
Simple time measurement – Timing 100 metres.
ADD function (partial times).
Adds several times together –Timing.Used to pause the
measured time, and then resume.
Split function (intermediate times)
This function is used to time intermediate times in a single
event. Intermediate times are calculated accumulatively
throughout the event.
Standard start-stop function
Timing a single event:
Presspush-piece:
to start the chronograph.
Presspush-piece:
to stop the chronograph.
Presspush-piece:
to reset.
Longines_MDE-L441.indb 31 01.04.15 14:44
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Longines L441 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Longines L441 in the language / languages: English as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info