757257
43
Zoom out
Zoom in
Previous page
1/50
Next page
L538
Correct time zone and the date every time the
hour hand passes midnight.
Position the hands to their start point
Time setting with stop seconds
231
Working position
Note: do not leave the time-setting crown in position 2 for
more than 20 minutes (time loss).
91
Quartz chronographs
3-position crown
Simple function
In this function, with the crown in position 1, push-piece A is used to
switch the chronograph status between START and STOP.
After START is pressed, the counter hands will show the measured time.
The 1/10th of a SECOND counter hand will not turn.
After STOP has been pressed, the 60-SECOND and 30-MINUTE counter
hands will stop running. The 1/10th of a SECOND counter hand displays
the value in tenths of a second as it runs.
To measure another time, press push-piece B to return the counters
to zero (RESET). All the hands will quickly return clockwise to their
start point, and the chronograph will switch back to watch mode.
Time setting and corrections
Unscrew the crown (if necessary), and pull it out to its furthest
position 3. The watch will stop and the hour and minute hands can
be adjusted for the time setting.
Hour, minute and seconds correction
Crown in position 3: the 3 counter hands will move to 12 o'clock.
Turn the crown to correct the hour and minute hands. Turn the crown
either way to correct the minute. Then push the crown fully back in
again (pos. 1), and screw it in.
To synchronise the watch with an ofcial time signal (radio, telephone,
etc.), pull the crown to its furthest position 3, at the moment when
the small seconds hand is at 60, then push the crown back in again
fully (pos. 1) at the time signal, and screw it back in.
The calendar changes every time the hour hand passes midnight.
Changing the time zone and the date
Unscrew the crown (if necessary), and pull it out to the intermediate
position 2. The hour hand will make one-hour jumps, enabling
quick time zone adjustments. The hour hand can be moved in either
direction without affecting the minute and seconds hands setting.
Turning the crown through 24 hours will cause a date change. The
crown can be turned either way. Then push the crown fully back in
again (pos. 1), and screw it back in.
02-English.indd 91 14.11.18 15:43
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Longines L296 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Longines L296 in the language / languages: English as an attachment in your email.

The manual is 5,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Longines L296

Longines L296 User Manual - Dutch - 46 pages

Longines L296 User Manual - All languages - 772 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info