64792
5
Zoom out
Zoom in
Previous page
1/21
Next page
8 Logitech
®
9Transporter
Owner’s Guide
Audio Connections
Transporter has a host of both digital and analog connections to choose from. Picking the
one that’s right for you depends on how your current audio system is set up. For instance,
if balanced inputs are available on your amplifi er, preamplifi er, or receiver, it’s usually better
to use those rather than the unbalanced inputs.
Transporter also provides a set of digital input connections to allow other digital audio sources
to use Transporter as a digital to analog converter. You can select from these inputs using the
remote control or front panel controls.
Transporter has the following audio connections available:
Analog Outputs
Unbalanced RCA connections (2Vrms/5.7Vpp, 100 ohms impedance,
with selectable attenuation)
Balanced XLR connectors (3Vrms/8.5Vpp, 100 ohms impedance, fi xed
attenuation)
Digital Outputs and Inputs
TOSLINK optical connector (660nm wavelength, IEC-958 / S/PDIF encoding)
Capacitor-coupled coaxial RCA connector (500mVpp into 75 ohms, IEC-958 / S/
PDIF encoding)
Transformer-coupled coaxial BNC connector (500mVpp into 75 ohms, IEC-958 /
S/PDIF encoding)
Balanced XLR connector (4.7Vpp into 110 ohms, AES/EBU encoding)
Word clock input for use with an external word clock generator
Using Transporter as a Standalone DAC
You can use Transporter as a standalone digital-to-analog converter (DAC) to convert S/PDIF
or AES/EBU signals from a CD player or other digital source to analog for connection to an
amplifi er or preamp.
When not connected to SlimServer or SqueezeNetwork (you will see Transporter Setup
on the top line of the display), use the remote control or knob to scroll to the digital input
you’d like to use then press the right arrow button, the center of the knob or the
PLAY
button. That input will remain selected until you choose another or connect to SlimServer
or SqueezeNetwork.
If Transporter is connected to SlimServer or SqueezeNetwork, scroll to the Digital Inputs
menu, go right, then press
PLAY to use the selected input.
Unbalanced Analog
Outputs
Optical
TOSLINK
Coax S/
PDIF
BNC
S/PDIF
AES/EBU
Balanced
Antenna
Connectors
Digital Inputs
Balanced
Analog
Outputs
Optical
Coax S/
PDIF
BNC
S/PDIF
AES/EBU
Balanced
Word
Clock
Input
Infrared
Input Output
Ethernet RS-232
Serial
AC Power
Connecting Transporter
1. Connect an output from the Transporter to your stereo amplifi er, preamp, or receiver with
the appropriate interconnect.
The most common connection uses the unbalanced analog output red and white RCA
connectors to connect to a line-level input, such as a CD or TAPE input. (Note: Transporter’s
outputs are not compatible with PHONO inputs.) More details about Transporter’s audio
connections are available in the Audio Connections section.
2. If you are using an ethernet network connection with your Transporter, connect an
ethernet cable from your hub or switch to Transporter. Otherwise, screw the included
wireless antennae to the two gold antenna connectors on Transporter.
3. Put the two AA batteries into the remote control.
4. Connect the included power cable to Transporter and plug it in.
You can leave Transporter plugged in all the time. When not in use, it enters standby mode
and dims the display. You can also dim the display by pressing the
BRIGHTNESS button on
the remote or front panel.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Logitech Transporter at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Logitech Transporter in the language / languages: English as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info