533451
29
Zoom out
Zoom in
Previous page
1/48
Next page
Logitech Harmony Touch
29
is in progress for which they were mapped. If you want to assign a button function for all Activities, you will need to
do it for each individual Activity.
How to map buttons to your remote
1. Select the Buttons tab on the left hand side of the screen.
2. Select an Activity for the area of the remote you would like to create a sequence for (screen options or
remote buttons) and click Go.
3. Select a button on the illustration of the remote. You can scroll the illustration to see buttons at the
bottom of the remote.
4. Hover over a command to assign to that button and click on Long Press, Short Press, or Both to make
the selection.
5. Click OK.
NOTE: Each button on your remote can be assigned more than one command. For example, the Fast
Forward button on the top of your remote can be set up so that quickly pressing it (short press)
activates the Fast Forward function and holding it (long press) activates the Skip Forward function.
Device Mode
It is recommended that you do not map buttons while in Device Mode because the mapping will not carry over into
any of your Activities. Instead, select an Activity to map buttons for.
How to get the most out of your Harmony Touch
You can prevent some common problems if you follow the tips in this section.
Important: use your Harmony Touch every time!
Always exclusively use your Harmony Touch to control your devices. Do not use other remotes to control your
devices, or manually turn them on or off or change inputs. Harmony is unable to track changes that it does not
make and will continue to assume your devices are in the state that it has left them in.
Adjust the power on delay
If your TV does not go to the right input when starting an Activity from an everything-off state, or does not go to any
input, try increasing the power on delay for your television. This feature is accessible in your remote’s Settings
menu and in your MyHarmony account. See the Delay settings section for more information.
Use the Help function to put the remote back in sync with devices
Sometimes Harmony becomes out of sync with your devices and confuses when they are on or off, or which input
they are on. This occurs when there is an obstacle between the device and your Harmony remote; or if the devices
are operated manually or by using their original remote control.
1. Harmony Touch can run through a series of questions to help identify the issue and correct it. Tap the
icon.
2. Select Help.
3. Answer Yes or No to the questions on the screen.
Based on your answers, your remote re-sends the necessary commands to synchronize it with your devices.
NOTE: If you use the Help feature frequently when powering on your devices or switching between
Activities, then there may be changes that can be applied to correct this. The Help feature should not
be necessary with a properly configured setup.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Logitech Harmony Touch at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Logitech Harmony Touch in the language / languages: English as an attachment in your email.

The manual is 3,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Logitech Harmony Touch

Logitech Harmony Touch Quick start guide - English - 84 pages

Logitech Harmony Touch Installation Guide - English - 84 pages

Logitech Harmony Touch User Manual - German - 45 pages

Logitech Harmony Touch Installation Guide - German, Dutch - 84 pages

Logitech Harmony Touch User Manual - Dutch - 45 pages

Logitech Harmony Touch Quick start guide - French - 84 pages

Logitech Harmony Touch Installation Guide - French - 84 pages

Logitech Harmony Touch Quick start guide - Portuguese, Spanish - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info