played when browsing the melody list.
6. Press OK to confirm.
3.10.3 Delete a Redial Number
1. Follow Steps 1 and 2 in the section of Redial a Number from the Redial List.
2. Press Down key to select DELETE.
3. Press OK to confirm and press OK again to confirm.
3.10.4 Delete the Entire Redial List
1. Follow Steps 1 and 2 in the section of Redial a Number from the Redial List.
2. Press Down key to select DELETE ALL .
3. Press OK to confirm and OK to confirm again.
3.11 Find the Handset (Paging)
Paging is a useful way for finding lost handset(s).
Press PAGE key on the bottom of the base station. All the registered and available handsets
will produce the paging tone and “PAGING” is displayed on the LCD.
Press C key on any handset or PAGE key on the base station again to stop paging.
NOTE : If there is an incoming call during paging, the phone will ring with the incoming call
instead of paging.
3.13 Multiple Handset Use
This feature is only applicable when there are at least two registered handsets. It allows you
to make internal calls, transfer external calls from one handset to another handset and make
conference calls. If the called handset is not answered within 60 seconds, the called handset
will stop ringing and the calling handset will return to standby mode.
3.13.1 Call Another Handset
1. In idle mode, press and the screen displays all registered handsets except the calling
handset.
2. Enter the desired handset number to intercom with.
3. The called handset rings and press the Phone on key of the called handset to establish
the internal call.
NOTE: If only one handset is registered to the base station, press C key and it will display
“NOT POSSIBLE ”.
• If only two handsets are registered to the base station, press will connect to another
handset immediately.
