633211
23
Zoom out
Zoom in
Previous page
1/32
Next page
3.2 Charging
Connect the charger to the port provided for this purpose and located under the phone.
After connecting the charger, the battery strength indicator located in the upper right-corner of the screen
scrolls, showing that the phone is charging. When the indicator is full and the scrolling stops, the battery is
charged. Disconnect the charger.
When the level of charge is insufficient, a warning message is displayed, and the charge indicator appears
empty. When the battery level gets too low, the phone turns off automatically. Do not leave the battery at a low
charge level too long, as this will damage it and alter its lifetime. Do not charge the battery too long.
Tip: To guarantee normal operation of your phone, use the intended charger.
4. Security password
PIN code
The PIN code (Personal Identification Number) is used to prevent illegal use of your SIM card. Generally, PIN
code and SIM card are provided together. If you input the PIN code incorrectly three times in succession, input
the PUK code to unlock the SIM card. Contact your network operator for more information.
PIN 2 code:
Input your PIN 2 code to use certain services such as a service call. If you input the PIN2 code incorrectly
three times in succession, input the PUK2 code to unlock the SIM card. Contact your network operator for more
information.
PUK code
To change the locked PIN code, input the PUK (Personal Unlock Key) code. Usually PUK2 code and SIM
card are provided together. Otherwise, contact your network operator. If you enter an incorrect PUK code ten
times in succession, the SIM card can no longer be used. Please contact your network operator to purchase a
new card. The PUK code cannot be changed. If you lose the code, contact your service provider.
PUK2 code
When you change the locked PIN2 code, input the PUK2 code. If you enter an incorrect PUK2 code ten times
in succession, the functions that require the PIN2 code will not be able to be used. Please contact your network
operator to purchase a new card. The PUK2 code cannot be changed. If you lose the code, contact your service
provider.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Logicom L-195 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Logicom L-195 in the language / languages: English, French as an attachment in your email.

The manual is 1,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info