Manual Lofrans Iris (page 19 of 76) (English, German, French, Italian, Spanish)

522465

Zoom out

Zoom in

1/76

Iris Rev. 08 – 2009

English

ALWAYS DISCONNECT THE BATTERY PRIOR TO INSTALLATION.

• The chain counter must be positioned so that the display will be easy to read. It should not be

exposed to direct sunlight.

• The rear part of the instrument must be protected from contact with water or moisture.

• The instrument may be fastened to dashboards of any thickness. The screws used for clamping

must be of the self-threaded kind and with a diameter of 3.5 mm (~9/64”) and a maximum

length of 10 mm plus the thickness of the dashboard.

• In the part to the rear of the dashboard there must be minimum clearance of 35 mm (1” 3/8) and

there must also be adequate access to perform installation and maintenance work.

• On the dashboard make a hole with a diameter of 30 mm (~ 1” 3/16), as indicated, and 4 holes

with diameters of 4 mm (~5/32”) for the chain counter clamping screws. Use cutting nippers to

cut the three pins on the back of the instrument, position the chain counter and fasten it to the

dashboard by tightening the four screws. If the dashboard already has a hole with a 54 mm

(2”1/8) diameter, it is not necessary to cut the pins on the back.

• The seal must be positioned between the chain counter and the dashboard.

For instructions on making electrical connections, see the attached diagram. The wires must have a

minimum cross section size of 1.5 mm².

• Install a 4 A (ampere) fast safety fuse on the + wire of the battery. Do not use the voltage

generated by the engine battery set to provide power.

• The instrument complies with EMC standards (EN55022) and must be positioned at a distance

of:

− 30 cm (~1 Ft) from the compass;

− 50 cm (~1.5 Ft) from radio equipment;

− 2 metres (~6.5 Ft) from radio transmitter equipment;

− 2 metres (~6.5 Ft) from the radar beam.

www.busse-yachtshop.de | info@busse-yachtshop.de

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Lofrans Iris in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,65 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Lofrans Iris Manual

Product: