475091
27
Zoom out
Zoom in
Previous page
1/34
Next page
27
HDMI (DVI) connection
The HDMI connection (High Defi niton Multimedia Interface) allows digital
picture and sound transmission via a connecting cable, e.g. from DVD
players. The digital picture and sound data are transmitted without data
compression and therefore lose none of their quality. No analog/digital
conversion is necessary in the connected equipment which also led to losses
in quality.
DVI signals can be also be reproduced by the HDMI connection using a
DVI/HDMI adapter cable. This is possible because HDMI is based on DVI
and is downward compatible. That means that the digital video signals
are transmitted via HDMI. In addition both use the same copy protection
method HDCP.
Connect the set with an HDMI connection with an HDMI cable (type A,
19-pin) to the HDMI socket of the TV set. Log in the HDMI connection in the
connection wizard (“TV menu” – “Connections”“New devices/modifi ca-
tions”).
Select the HDMI connection in the AV selection.
Call AV selection
VIDEOCOMP. IN
AVS
G
A/XGA
AV2
HDMI/DVI
AV selection
AV1
OK
3
3
Select HDMI/DVI socket and with ...
call up
Start playback on the connected device with HDMI connection.
The best possible formats for picture and sound are detected and set
automatically.
No sound is transmitted when a DVI/HDMI adapter cable is used for
transmission. You can feed in the appropriate analog sound via the audio
input sockets AUDIO IN L/R on the TV set. The sound is played over the TV
loudspeakers.
If you have connected a digital external audio amplifi er, you can select
the digitla audio signal in the connection wizard (TV menu - Connections
- New devices/changes) and assign it to the HDMI/DVI socket. You do the
other settings for the audio amplifi er as described for the digital amplifi er
on page 26. The digital audio signal of the DVI audio source is fed in at the
AUDIO DIGITAL IN socket on the TV. The digital audio signal from the TV
AUDIO DIGITAL OUT is fed to the amplifi er.
VGA/XGA connection
You can connect a PC or a Set Top Box (STB) and therefore use the TV
screen as an output device.
Connect the PC/STB with a VGA cable to the VGA/XGA socket on the TV.
When connecting to a PC you set one of the following screen resolutions on
your PC fi rst. 800x600 60Hz (SVGA) and 1024x768 60Hz (XGA).
When a Set Top Box is connected you set the following screen resolutions
according to the possibilities of the Set Top Box:
SDTV - standard modes in STB: 720x576i PAL (50 Hz),
720x 480i NTSC (60 Hz)
HDTV modes: 1280x720p, 1920x1080i
ProScan: 720x576p (50 Hz), 720x480p (60 Hz)
Select the VGA/XGA connection in the AV selection.
Call AV selection
VIDEOCOMP. IN
VGA/XGA
AV
2
AVS
HDMI/DVI
AV selection
AV1
OK
3
3
Select VGA/XGA socket and with ...
call up
Start the connected device.
Set geometry
Call the TV menu with the MENU button, select “Geometry“ with 34and
set:
If the picture is not positioned correctly you can move the picture horizon-
tally and vertically here so that it fi lls the whole screen. You can also set the
phase position so that the picture appears in the best possible quality.
Set color standard
Call the Picture menu with the
button. Select “Color standard“
with 34and select.
The color standard for a connected PC is RGB.
In Set Top Boxes you usually set Ycc as a color standard. Other formats
such as Ypp or RGB can also be output. Please consult the manual of the
connected device.
If the wrong standard is selected, you will recognize this from the wrong
colors in the display.
Operating additional equipment
OK
OK
AV
OK
OK
AV
32398_020 Xelos A32_37_Buch.indb 2732398_020 Xelos A32_37_Buch.indb 27 10.02.2005 11:10:08 Uhr10.02.2005 11:10:08 Uhr
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Loewe Xelos A 37 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Loewe Xelos A 37 in the language / languages: English as an attachment in your email.

The manual is 4,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Loewe Xelos A 37

Loewe Xelos A 37 User Manual - German - 46 pages

Loewe Xelos A 37 User Manual - Dutch - 46 pages

Loewe Xelos A 37 User Manual - French - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info