475091
19
Zoom out
Zoom in
Previous page
1/34
Next page
19
n
Programming recording for recorders
You prepare the station marked with the 65 buttons for recording by
pressing the red button. In the following menu you confi rm the timer data
or change them as required. Then a red dot is set in front of this program
in the EPG program list as an identifi cation. If you select this program, you
can delete the program from the timer again with the red button.
Call EPG menu:
Call EPG menu
INFO
END
Data capture
Timer overview
EPG menu
Select provider/channel
3
3
OK
Swit
c
You will fi nd the following settings in the EPG menu:
select provider/channel • Timer overview • Data capture
Switch on TV when marked
Selection of provider/station
In case of analog TV programs, you can change the provider (the station
which transmits EPG data) to have other programs evaluated. You can do
this under ”Select provider/channel”.
Select ”Select provider/channel” and call this menu with OK. If the station
you want to change to is not listed in the “Select provider“ list, start the
provider search with the green button. This takes a while.
Or, if you know the station, press the yellow button for “Change provider
list“. Select the provider in the program list and enter it with OK and return
to the provider selection with END.
Select the provider in the “Select provider“ and enter with OK. Then a
program range search is performed. The programs offered by the provider
are displayed in a list.
If you want certain programs to be omitted from the program guide, you
can select and deactivate these in the Program selection. Call the pro-
gram selection with the blue button. Now all programs are displayed (the
DVB programs too). Programs marked by E are analog terrestrial/cable pro-
grams, programs marked by D are digital programs ready for the program
guide. Select the programs you want to omit from the program guide one
after another and deactivate each one with OK.
Data entry
After these settings or every time the switch is set off with the mains
switch, the data must fi rst be collected (only for analog TV). To do this,
select the program which you have defi ned as a provider and leave it
switched on for about 1 hour or switch the set to standby. The indicator on
the TV set lights green and red after about 2 minutes. The data entry begins
and lasts about 1 hour. The data are also automatically collected between 2
and 5 in the morning when the TV is switched to standby.
A prerequisite for data entry is that “Data capture“ is “on“ in the EPG
menu.
Note: If the TV set is switched off with the ON/OFF button on the screen
or the mains plug is pulled out, all EPG data are lost.
If you cannot receive any EPG providers, for example, you should switch off
the data entry.
Switch on TV when marked
You can have the TV switched on automatically from standby at the begin-
ning of the memorized program. If you are not present at the time, a safety
prompt makes sure the TV switches off again after 5 minutes.
MENU
Modes of operation
32398_020 Xelos A32_37_Buch.indb 1932398_020 Xelos A32_37_Buch.indb 19 10.02.2005 11:10:03 Uhr10.02.2005 11:10:03 Uhr
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Loewe Xelos A 37 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Loewe Xelos A 37 in the language / languages: English as an attachment in your email.

The manual is 4,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Loewe Xelos A 37

Loewe Xelos A 37 User Manual - German - 46 pages

Loewe Xelos A 37 User Manual - Dutch - 46 pages

Loewe Xelos A 37 User Manual - French - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info