549234

Loewe Subwoofer 200 Manual

14
Zoom out
Zoom in
Previous page
1/62
Next page
- 14
Deutsch English Français Italiano Español Nederlands
Start-up and settings
Before commencing the start-up and settings, please make sure that all cables
are connected correctly.
Switching the subwoofer on/off
Use the mains switch Power
5
to switch the subwoofer on in position ON and
off in position OFF.
➠ If you wish to toggle between the operating modes Wireless or Cable via
Audiolink, switch the unit off for minimum 30 seconds and then on again.
Mode with Loewe TV sets
If the subwoofer is connected via the Audiolink connection, as described on
page 13,
2
the Mode - ON/AUTO
7
switch is in the AUTO position and
the Mode - 2.1/Stereo
6
switch is on the 2.1 position, you no longer need to
switch the subwoofer on and off separately. After switching on the subwoofer for
the rst time, it is automatically switched on and off together with the Loewe TV set.
➠ Register the presence of the subwoofer as described in the instructions for
use of your Loewe TV set under "Operating extra devices" or "External
devices".
Automatic operation with other audio sources
If there is no Audiolink connection, the Mode - ON/AUTO
7
switch is at the
AUTO position and if audio signals are present at the Cinch sockets Line IN - Right/
Subw/Left
1
the subwoofer will switch on automatically. After 10 minutes with-
out an audio signal at these sockets, the subwoofer will switch off automatically.
➠ The subwoofer can switch on automatically if fault signals are present on
the audio lines. In this case, activate the mains switch
5
.
➠ The subwoofer can switch off automatically during longer, very quiet pas-
sages. In this case, increase the volume.
Continuous operation with other audio sources
If you wish to operate the subwoofer in continuous mode, switch the Mode - ON/
AUTO
7
switch to the ON position. Then switch the subwoofer on or off with
the mains switch Power
5
.
Stereo mode
Move the Mode - 2.1/Stereo switch
6
switch to the Stereo position if you are
only feeding the audio signals in at the Cinch sockets Line IN - Right/Left.
1
The bass manager integrated in the subwoofer then automatically directs the bass
components contained in the stereo signals to the subwoofer channel.
2.1 Mode
Move the Mode - 2.1/Stereo switch
6
switch to the 2.1 if you are feeding the
audio signals in at the Cinch sockets Line IN - Right/Subw/Left
1
.
Wireless
Move the Mode - ON/AUTO
7
switch to the ON position if you wish to connect
the subwoofer to a compatible audio source via a wireless link. Activate Coupling
mode, as described in the instruction manual of the relevant audio source. Use
a sharp object (e.g. paper clip) and press briey on the button in the opening to
move
8
the optional Module Wireless Audiolink in Coupling mode. If the
registration was not successful, please try again and reduce the distance of the
subwoofer to the audio source.
➠ The distance between the subwoofer and audio source must not exceed 10
m in the same room.
➠ The rotary switches Crossover Frequency
9
, Equalizer
10
and Bass
Intensity
11
do not have any function in the Wireless operating mode.
Setting the crossover frequency
The Crossover Frequency knob
9
gives you the option to set the limit frequency
for the bass playback - depending on which speakers you have connected - between
50 Hz and 350 Hz.
As described on page 13, for Loewe audio systems the knob should be set to 350
Hz because the crossover frequency is set to this in the Loewe audio sources (TV set).
Setting the equalizer
The Equalizer knob
10
gives you the option of setting a reduction or increase in
the lowest frequency ranges (20 Hz - 50 Hz) for the bass playback.
• If the subwoofer is near the corner of the room, turn the Equalizer knob
10
more towards -3 dB.
• If the subwoofer is near a wall, then turn the Equalizer knob more to the
middle position.
• If the subwoofer is freestanding in the room, turn the Equalizer knob
10
more towards +3 dB.
Bass intensity
You can use the Bass Intensity control
11
to set the basic bass volume to how
you want it.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Loewe Subwoofer 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Loewe Subwoofer 200 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 8,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info