679332
31
Zoom out
Zoom in
Previous page
1/36
Next page
Troubleshooting
Problem Possible Cause Remedy
Not working at all Mains cable not plugged in. Plug the mains cable firmly into the socket on the Sound
Projector and then into a 220-240 V 50 Hz socket with pro-
tective ground.
The unit suddenly switches to standby. The internal temperature is too high which has
activated the protective circuit to avoid overheating.
Wait for approx. 1 hour until the unit has cooled down and
then switch it on again.
No sound. Faulty connections of input or output cables. Connect the cables properly (page 13 - page 15). If the problem
persists, it is possible that the cables are faulty.
No suitable input signal source has been selected. Select a suitable input source using AUX (PIP) or SOURCE.
The volume is set at minimum. Turn up the volume.
The sound is set to mute.
Press
or V + on the remote control to activate audio output
again and then adjust the volume.
No sound from the effect channels. You are trying to play back the signal source or the
programme in stereo.
Press one of the sound field programme buttons on the remote
control to select a multichannel playback mode and try again
to play back the signal source or the programme.
No sound from the centre or the surround
channels.
The source level of the affected channel is set to
minimum.
Increase the level of the channel (page 28).
The surround sound effects can hardly be heard. The listening room has an irregular shape. Install this unit in a square or rectangular room (page 11).
There is no reflection wall for the sound beam. Try setting up a flat object, such as a screen, as a replace-
ment wall.
There is noise interference if no subwoofer is
connected to this unit.
The protective circuit was active because a source with
strong bass elements was being played.
Reduce the volume or connect a subwoofer and set the settings
for a subwoofer via the sound menu (page 28).
The on-screen dialogue (OSD) does not appear. The socket VIDEO OUT/HDMI on this unit is not con-
nected to the input sockets on your TV set.
Connect the socket VIDEO OUT (Composite) on this unit to
the input sockets on your TV set.
The unit is not working properly. Unplug the mains plug from the mains socket and then try
plugging it in again after 30 seconds.
The sound effects are not satisfactory. The original signal source contains surround effects. Deactivate the surround effect settings on this unit.
Auto set-up is unsuccessful. See the error messages on page 32.
The remote control is not working properly. The batteries in the remote control are dead. Replace the batteries with new ones.
Set the remote control for Sound Projector operation.
31 -
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Loewe Sound Projector ID at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Loewe Sound Projector ID in the language / languages: English as an attachment in your email.

The manual is 2,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Loewe Sound Projector ID

Loewe Sound Projector ID User Manual - German - 36 pages

Loewe Sound Projector ID User Manual - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info