475139
20
Zoom out
Zoom in
Previous page
1/78
Next page
- 20
English
Commissioning and setting
Before beginning with start-up and operation, make sure that all the cables are
connected correctly.
Switching the subwoofer on/off
Switch the Power switch k to the ON position to switch on the energy supply
(mains 230V/50Hz) for the Reference Sound Subwoofer. Set the switch to OFF to
switch off the subwoofer completely.
Automatic or manual operation
If the subwoofer is connected as described on page 8 and the Mode switch l
is in the Auto position, you no longer need to switch the subwoofer on and off
separately. After switching on the subwoofer for the first time it is switched on
and off automatically with the Loewe TV set.
If the subwoofer is operated on other devices than the Loewe Flat-TV, the Mode
switch l must be switched to the Manu. position. The subwoofer must then be
switched on/off manually with the Power switch k.
Settings on the Loewe TV set
Log in the new devices as described in the operating manual of your Loewe
TV set in the chapter “Operating additional equipment – Connecting audio
ampliÀ ers”.
Setting the equalizer
Using the knob Equalizer f you can set the lowest frequency ranges (20 Hz -
50 Hz) for bass playback to be raised or lowered.
If the Subwoofer is near the corner of the room, then set the knob Equalizer
more in the direction min.
If the Subwoofer is near a wall, then set the knob Equalizer more in the
middle position.
If the Subwoofer is freely positioned in the room, then set the knob Equalizer
more in the direction max.
Phase switch
With the phase converter Phase e you have the option of optimising the
bass playback. However, you can easily make this setting in connection with
a Loewe Flat TV (from chassis L27xx with integrated AC3 decoder onwards)
using a remote control via the TV menu in the sound component assistant (see
operating instructions under „Setting loudspeaker system“). The phase converter
is designed for systems where settings can not be made using the TV.
We recommend you to proceed as follows:
Start DVD playback for example and select a title with bass parts.
Have a second person activate the phase switch whilst you sit and listen.
Decide for yourself which switch position reproduces the best bass sound.
Bass intensity
Using the controller Bass-Intensity h you can set the basic bass volume to
suit you.
Setting the crossover frequency
The Crossover Frequency knob g gives you the possibility of setting the
limit frequency for bass reproduction between 50 Hz and 250 Hz depending on
which speakers you have connected.
The knob should be set to 250 Hz for Loewe Audio Systems because the crosso-
ver frequency is set in the Loewe audio sources (TV).
Cover on the subwoofer
After you have made the settings described in “Commissioning and setting”,
replace the cover on the rear of the subwoofer.
k
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Loewe Reference Sound Subwoofer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Loewe Reference Sound Subwoofer in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 3,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info