548726
48
Zoom out
Zoom in
Previous page
1/72
Next page
- 48
Operating additional equipment
Devices to the HDMI (DVI) connections
The HDMI connections (High Definition Multimedia Interface) allow the
transmission of digital video and audio signals from a player, e.g. DVD
player, DVD recorder, Blu-ray player, game console or Set-Top-Box via a
single cable.
The digital video and audio data are transmitted without data compres-
sion digitally and therefore lose none of their quality.
A maximum of five devices can be connected in cascade to every HDMI
socket. The devices are arranged in the AV menu and in the station list
below the appropriate HDMI socket. If the respective device sends its own
device name, this appears in place of the connection name.
Your TV set shows 24p films (see glossary on page 67) which are output
by a player connected via HDMI, e.g. Loewe BluTech Vision, automatically
in the original 24p format.
Film quality improvement (DMM) must be set to on (see page 22).
Digital video signals from a DVI player can be also be reproduced by the
HDMI connection using a DVI/HDMI adapter cable. The sound must be
piped in additionally.
HDMI and DVI both use the same copy protection method HDCP.
Connecting the device
It is not necessary to register HDMI devices with the
connection wizard.
Switch off all equipment before connecting.
Connect the device with an HDMI cable (type A, 19-wire)
to the HDMI1/DVI or HDMI2/DVI socket of the TV set.
If a DVI/HDMI adapter cable is used, the corresponding
sound can be piped through the AUDIO IN1 (analogue)
or AUDIO DIGITAL IN (digital) socket on the TV set (see
also page 53).
Playback from the device
Call AV selection.
Select HDMI1/DVI or HDMI2/DVI socket.
With Digital Link HD-capable devices the device
name may possibly appear in place of the connection
name.
OK Switch over.
Start playback on the connected HDMI device. The best
possible format for the picture is detected and set auto-
matically.
Digital Link HD
With Digital Link HD accessory equipment with CEC support (see glossary
on page 67) is controlled by the TV set. A concealed installation of the
accessory equipment is also possible.
Operation of equipment with Digital Link HD
As long as a HDMI programme slot is selected, all remote control com-
mands which can be processed by the device connected to the respective
socket are passed on to it. The device can therefore be installed concealed
and still be controlled.
Volume setting, sound off/on, sound adjustment and selection of
picture format always act on the operation of the TV set.
On/off button:
short: Switch off TV set to the standby mode.
long: Switch off TV set and connected Digital Link
HD-capable equipment to the standby mode
(system standby).
TV button:
short: Switch back to the last viewed TV station.
long: Switch Digital Link HD on/off temporarily to oper-
ate the TV set.
Remote TV switch on via Digital Link HD
In the TV menu under Connections Miscellaneous Remote TV switch
on via Digital Link HD, you can select whether the TV set is to switch
on automatically from standby mode when a disc is played or a screen
menu displayed on connected Digital Link HD-capable HDMI equipment.
TV set
Blu-ray player
HDMI2
Connection
example of a
Blu-ray player
OK
OK
END
Switch to ...
COMP. IN
HDMI2/DVI
HDMI1/DVI
PC IN
AVS
DVD-REC
AV1
VIDEO
AV selection
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Loewe Modus L 32 Full-HD 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Loewe Modus L 32 Full-HD 100 in the language / languages: English as an attachment in your email.

The manual is 2,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Loewe Modus L 32 Full-HD 100

Loewe Modus L 32 Full-HD 100 User Manual - German - 72 pages

Loewe Modus L 32 Full-HD 100 User Manual - Dutch - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info