143121
10
Zoom out
Zoom in
Previous page
1/28
Next page
- 10
Initial installation
Switch On/Off
Press the On / Off button (mains voltage) on the right hand
side of the set until it locks.
The red indicator on the TV set now lights up (standby mode).
Switch on the set with the switch integrated in the display. The
green indicator now lights up (other operating possibilities,
see page 11).
It takes about 2 minutes after switching for the screen to reach full brightness
due to the LCD technology.
If you will not be using the TV set for a long time, e.g. during a vacation, switch
it off with the On/Off button (mains voltage). The set is then disconnected from
the power supply.
Automatic programming
Automatic programming of the TV set is started the rst time you switch it on.
Follow the menus
By pressing the OK button in the direction of the arrow
 you select the setting ...
OK
... and con rm your settings with OK. You then go to the next
menu.
OK
Back to the previous menu.
1. First you have to select the menu language.
In models without DVB-T, please continue with step 3.
2. Press the OK button to go to the ”Signal source” menu. If you want to re-
ceive terrestrial stations
digitally (only in DVB-T
models), select “DVB-T”,
con rm with the yellow
colour button. If you se-
lect ”Antenna/cable” as well, you can also search for and store conventional
analog stations.
3. For speci c national station sorting and pre-settings, enter the location at
which your TV is being used.
In models without DVB-T, please continue with step 5.
4. When you have selected ”DVB-T”, you go to the ”Antenna DVB-T” menu. If
you are using an active antenna, mark “yes (5V)”.
5. With OK you get an overview of which settings are to be used for the auto-
matic programming.
6. Press the OK button again to start the station search. The set searches for,
sorts and stores all receivable TV stations, according to your setting and the
connected antenna.
7. When the TV stations are stored, an appropriate message is displayed.
8. The radio stations are then searched for with OK.
9. The TV set searches for, saves and sorts all radio stations which are receiv-
able on your antenna system.
10. When the radio stations are stored, an appropriate message is displayed.
11. The station search is terminated with OK.
12. Finally log in your recorder, DVD player etc. and connect it with the TV set
(also see page 21)
You can repeat initial installation at any time, e.g. after moving house.
Call the index with the INFO button.
INFO
Select the index item “Repeat initial installation“.
OK
Start with OK.
OK
Channel sorting
You can change the station sorting that was carried out automatically later at
any time, see “TV menu – Settings – Channels – Change“.
Proceed
Back
OK
Mark/unmark
Signal source
Antenna/cable
DVB-T
(
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Loewe mimo l 20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Loewe mimo l 20 in the language / languages: English as an attachment in your email.

The manual is 4,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Loewe mimo l 20

Loewe mimo l 20 User Manual - German - 28 pages

Loewe mimo l 20 User Manual - Dutch - 28 pages

Loewe mimo l 20 User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info