807069
20
Zoom out
Zoom in
Previous page
1/328
Next page
19
Loewe klang bar5 mr
deutsch
english
Note
Your TV must support the HDMI-CEC and ARC
function. HDMI-CEC and ARC must be set to On.
The setting method of HDMI-CEC and ARC may
differ depending on the TV. For details about
ARC function, please refer to your TV operating
instructions.
Only cables compatible with HDMI version 1.4 or
higher can support the ARC function.
Option 2 - Standard HDMI
If your TV is not HDMI ARC-compliant, connect your
Soundbar to the TV through a standard HDMI con-
nection.
1. Use an HDMI cable to connect the Soundbar’s
HDMI IN (1 or 2) connector to your external
devices (e.g. game consoles, DVD players and
blu-ray).
2. Use an HDMI cable to connect the Soundbar’s
HDMI OUT (TV eARC/ARC) connector to the
TV’s HDMI IN connector.
Note
This connection option allows only playback of video/
audio from external devices connected directly to the
HDMI 1 or 2 inputs on the soundbar. If your TV does
not have an HDMI ARC connector and you wish to
play sound from TV on the soundbar, you will need to
use alternative connection (e.g. Optical or Analogue).
6.3 Connecting with an optical
cable
Using an optical cable (not included), connect the
OPTICAL connector on your soundbar to the OPTICAL
OUT connector on the TV or other device.
The digital optical connector might be labeled
SPDIF or SPDIF OUT.
6.4 Connecting with an analogue
audio cable
Option 1
Use a 3.5mm to 3.5mm audio cable (not included) to
connect the TV’s or external audio device headphone
socket to the AUX IN socket on the unit.
Option 2
Use an RCA to 3.5mm audio cable (not included) to
connect the TV’s audio output sockets to the AUX IN
socket on the unit.
6.5 Connecting the power
Note
Before connecting the AC power cord, ensure you
have completed all other connections.
Risk of product damage! Ensure that the power
supply voltage corresponds to the voltage printed
on the underside of the unit.
1. Connect the mains cable to the AC IN Socket
of the soundbar and then into a mains socket.
2. Connect the mains cable to the AC IN Socket
of the subwoofer. Secure the cable to the cable
management compartment on the bottom side
of the subwoofer. Finally, plug the power cable to
the mains socket.
6.6 Connecting the subwoofer
Automatic Pairing
The subwoofer provided is a WDAL 2.0 device. This
means that for the subwoofer to work, the WDAL 2.0
switch labelled SUB must be set to SMALL or LARGE.
Remove rear flap from soundbar and check the position
of the SUB switch. If it is in OFF position, please change
its position to SMALL or LARGE.
Plug the soundbar and the subwoofer into the mains
sockets and then press on the unit or remote
control to switch the unit to ON mode. The subwoofer
and soundbar will automatically pair.
Determine the status based on the wireless sub-
woofer indicator.
LED indicator state Status
LED ashes quickly Subwoofer is in pairing
mode
LED is on Connected / Pairing
successful
LED ashes slowly Connection / Pairing
failed
Note
Do not press volume knob on the rear of the subwoofer,
except for manual pairing.
Connecting the soundbar
HDMI OUT
eARC / ARC
HDMI IN
HDMI OUT
Blu-ray Player / DVD Player /
Recorder / Set-top Box...
HDMI IN 1 HDMI IN 2
OPTICAL OUT
OPTICAL
Headphone
(3.5mm )
AUDIO OUT
AUX
R
L
AUDIO OUT
AUX
AC IN
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Loewe klang bar5 mr at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Loewe klang bar5 mr in the language / languages: All languages as an attachment in your email.

The manual is 24.07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info