475125
125
Zoom out
Zoom in
Previous page
1/162
Next page
125 -
english
DIGITAL
OUT
AV
Audio connection in HDMI/DVI devices
External devices with DVI connection
If an external device with DVI interface is connected via a HDMI/DVI
adapter to one of the HDMI sockets of the TV set, you can connect the
digital sound of the external device to the digital audio input socket
AUDIO DIGITAL IN.
The assignment of the digital audio input to the corresponding HDMI
socket of the TV set takes place as described in the column on the left.
If you want to use the analogue sound of the external device, connect
it to the AUDIO IN socket.
External devices with HDMI connection
If external devices with an HDMI interface are connected to one of the
HDMI sockets of the TV set, no assignment of the audio input is necessary
because the digital transmission of picture and sound takes place via a
single connection in HDMI.
Serial interface RS-232C (RJ12)
You can connect either the Loewe Individual Sound Projector SL or a home
network system of different manufacturers (e.g. AMX, Crestron) to your
TV set via the RS-232C (RJ12) interface.
Please consult your dealer for configuration of the RS-232C (RJ12) interface
and further information about the different home networking systems.
Assignment of the digital audio input
In order to be able to hear the digital sound of an external device con-
nected to an AV input, an AV input can be assigned to the digital audio
input socket AUDIO DIGITAL IN. By switching to this AV input, the digital
audio signal at the AUDIO DIGITAL IN input is communicated to the integral
digital multi-channel audio decoder and the digital audio output socket
AUDIO DIGITAL OUT. You will then hear the digital sound of the assigned
AV input instead of the analogue sound if available.
Connecting devices to the digital audio input
For the digital audio playback from an external device, e.g. the DVD player,
you have to feed the digital audio signal to the TV set.
The external digital audio signal can be reproduced via the digital multi-
channel audio decoder integrated in the TV set, via an externally connected
digital audio amplifier or via a Loewe Individual Sound Projector SL.
If an external audio amplifier or Loewe Individual Sound
Projector is used, this must be registered in the sound
components wizard (see page 124).
MENU: Call TV menu.
Select Connections,
go to the menu line below.
Select Miscellaneous,
go to the menu line below.
Select Assign digital audio input,
go to the menu line below.
Select AV input.
To connect a DVD player to the digital audio input of the
TV set for example, connect the digital output socket of
the DVD player (DIGITAL OUT) via a cinch cable to the
AUDIO DIGITAL IN socket on the TV set.
Connection example for a DVD player, see right hand
column.
to AVS to HDMI1 to HDMI2 to
H
TV MENU
Connections
Miscellaneous
Assign digital audio input
to AV
no
External devices
AUDIO
DIGITAL
IN
TV set
DVD player
AV
125


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Loewe Individual 32 Selection Sound LED at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Loewe Individual 32 Selection Sound LED in the language / languages: English as an attachment in your email.

The manual is 4,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Loewe Individual 32 Selection Sound LED

Loewe Individual 32 Selection Sound LED User Manual - German - 162 pages

Loewe Individual 32 Selection Sound LED User Manual - Dutch - 162 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info