475074
5
Zoom out
Zoom in
Previous page
1/49
Next page
5
Preparing for initial start-up
Make sure an antenna for the VHF/UHF range is connected to the
VHF/UHF/DVB-T” antenna socket.
With this antenna you can receive both analog and digital stations
(DVB-T) providing these are broadcast in your area.
•For the digital satellite reception (DVB-S) a suitable satellite antenna
must be connected to the antenna socket ”DVB-S” (see fig. page 4).
Inserting the Common-Interface module
(Only for sets with CI slot)
In order to be able to receive coded digital stations, the Common Interface
Module (CI module) and the Smartcard have to be inserted in the
appropriate slot of your TV. If this is not already the case, you have to
insert both. You can find the slot on the rear of your TV set, see fig. on
page 4.
1. Make sure that the TV set is switched off with the On-Off switch (not
on standby).
2. First push the Smartcard into the CI module as far as possible. The side
with the golden contact chip
neeeds to face the side of the
module printed with the
provider’s logo. Printed
arrows show you how to
insert the card.
Please also observe the installation
instructions enclosed with the Smartcard.
3. Push the CI module carefully, with the contact side
facing forwards, into the slot. The logo on the
Common Interface Module must be visible.
Make sure the module is not inserted skew.
Do not use force. The eject button is pressed out
when the module snaps in.
Initial start-up
Initial start-up
The TV’s automatic station programming is started after switching on for
the first time.
Follow the menus and make the necessary settings one after another.
Choose the settings …
using the arrows on the OK button.
... Confirm your settings with OK. You then go to the next
menu.
A) First you have to select the
menu language e.g. ”English” with the remote control.
B) Pressing the OK button takes you to the menu „Connect antenna(s)“.
If you wish to receive digital stations via satellite, select „Satellite
DVB-S“ and confirm with the yellow button.
If you wish to receive digital terrestrial stations (DVB-T), select
„Antenna DVB-T“.
Also select „Antenna/Cable (analogue) yes“, which allows you to
search for and store conventional analogue stations.
C) You go to the ”Location of setmenu by pressing the OK key.
State in what country you are operating your TV.
D) If you have selected DVB-T, pressing the OK button will take you to the
menu „Antenna DVB-T“.
E) You can make the selection corresponding to your satellite antenna
system in the menu „Select satellite system“.
Ask your antenna technician or dealer about the type of
satellite antenna system and the antenna settings if necessary.
In the ”Satellite system” menu state whether you can receive stations
from one or several satellites with your antenna system.
If you receive only one satellite...
F) Select the satellite at which the antenna is aimed, e.g. ASTRA 1.
G) In the following menu enter whether the station search is to take place
in the high and low band (Yes) or only in the low band (No).
COMMON INTERFACE
Auswurfknopf
CI-Modul
OK
OK
DVB_T_S_GB_F_Esp 18.11.2004, 13:51 Uhr5
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Loewe DVB-T-S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Loewe DVB-T-S in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Loewe DVB-T-S

Loewe DVB-T-S User Manual - German, Dutch, Italian - 50 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info