511999
67
Zoom out
Zoom in
Previous page
1/164
Next page
Connect ID 32-55 - 67 -
Operating instructions
Configuration of the built-in LAN adapter
Adapter configuration is accessed over the media
menu (see page 66).
You will see an overview of the current settings for the
selected network adapter (for an explanation of the
points, see page 68).
OK Change settings for the network adapter.
34 Select type of IP configuration.
Manual: Enter your fixed static IP address manu-
ally (see below).
Automatic: Automatic configuration of the IP address
via DHCP server or via multiple protocols
according to UPnP specification (including
DHCP).
OK Proceed.
If manual has been selected under IP configuration:
56 Enter IP, Subnet mask, Gateway and DNS server
addresses in succession with the numeric keys on
the remote control.
OK Proceed.
You will now see an updated overview of the settings
for the network adapter.
OK End of wizard.
OK
NETWORK WIZARD: WIRED
Current adapter settings:
IP configuration Manual
IP address 192.168.2.123
Subnet mask 255.255.255.0
Gateway 192.168.2.1
DNS server 1 192.168.2.1
DNS server 2 192.168.2.1
Additional adapter data:
MAC address 00:09:82:11:99:11
Change settings
Configuration of a wireless adapter (e.g. WLAN bridge adapter)
Adapter configuration is accessed over the media
menu (see page 66).
You will see an overview of the current settings of the
network adapter (similar to the illustration in the left-
hand column).
OK Change settings for the network adapter.
The TV set now searches for wireless routers.
Red button: Stop search.
After the end of the search:
56 Select required base station from the options
found.
OK Proceed.
If the desired access point is not found:
Red button: Repeat the search. Or:
Yellow button: Specify base station manually, e.g. if the
SSID of the access point is not trans-
ferred. Same procedure as for Rename
station, see page 47.
OK Proceed.
If your wireless network has an encryption, select the
encryption method and then enter the WLAN password
(procedure same as for Rename station, see page 47).
Contact your network administrator if you do not
know the WLAN code.
For encryption types supported, see page 142.
For WEP encryption:
56 Select the WEP index,
OK Proceed.
34 Select type of IP configuration (see left column).
You will now see an updated overview of the settings
for the network adapter.
OK End of wizard.
n
Media
+
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Loewe Connect ID 55 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Loewe Connect ID 55 in the language / languages: English as an attachment in your email.

The manual is 48,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Loewe Connect ID 55

Loewe Connect ID 55 User Manual - German - 162 pages

Loewe Connect ID 55 User Manual - Dutch - 164 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info