511999
53
Zoom out
Zoom in
Previous page
1/164
Next page
Connect ID 32-55 - 53 -
Operating instructions
Paging through the programme list
P+/P– Page backwards / forwards.
In the entries for Date and Time, you will see changes
in time as well as in date when paging. Scrolling in the
programme list is also possible when the selection is at
the top of the specifications.
Calling additional information about the programmes
Brief information about many programmes is
displayed below the programme list of the broad-
casts.
You can call detailed information with the TEXT button if
this function is offered by the TEXT icon in the lower left.
The symbol explanations are described on page 40.
Programming a recording for a recorder
The selection is in the lower programme list,
if not, press the blue button.
The displayed page of the programme list includes
the desired programme, otherwise browse to it or
suitably limit via the specifications in the lower
section.
65 Mark the desired programme.
RECORD button: Timer data is called up.
Change or confirm timer data if necessary (see page 126,
“The direct way to record”).
Then a red dot will be displayed in front of this
programme as an identification.
RECORD button: Deletes the already programmed record-
ing of the red marked programme from the timer.
Configuring EPG
Start the EPG menu
EPG mode is started,
if not, press the EPG button.
MENU: Call the EPG menu.
Explanations of setting possibilities in the EPG menu:
In the station selection you can determine for which
station in the programme guide information is to be
displayed. Programme information is only displayed for
stations with in the EPG list.
With the coloured buttons you can select or remove sta-
tions or only select the stations from the favourites lists.
Because of the large number of receivable DVB-S stations
you should restrict the station selection. This reduces
the data entry time and increases the clarity in the EPG.
Marking the stations according to reception ranges:
Digital terrestrial stations (DVB-T).
Digital cable stations (DVB-C).
Digital satellite stations (DVB-S).
Here you can switch the data entry for the electronic
programme guide (EPG) on and off.
If the data entry is switched on, your TV set tries to
update the database overnight (normally between 2
and 5 am) or if required two minutes after switching to
stand-by mode. The TV set must be on stand-by for this
and not switched off at the mains switch.
The indicator on the TV set lights yellow during data
entry in stand-by mode.
The data are also updated while you are watching the
EPG station.
When yes is set, the switched off TV switches on au-
tomatically from the standby mode at the beginning
of a set programme. A screen message appears when
switching on. If this is not confirmed within 5 minutes
with the OK button, the TV switches back off automati-
cally for safety reasons.
The programmes can be sorted either according to their
start times (chronologically) or according to stations (cor-
responding to station list).
Data capture Switch on TV when marked Sorting
STATION SELECTION
Please select the stations you want to receive EPG information for.
EPG MENU
Station selection
OK
Station
selection
Data capture
Switch on TV
when marked
Sorting
n
Electronic Programme Guide
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Loewe Connect ID 55 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Loewe Connect ID 55 in the language / languages: English as an attachment in your email.

The manual is 48,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Loewe Connect ID 55

Loewe Connect ID 55 User Manual - German - 162 pages

Loewe Connect ID 55 User Manual - Dutch - 164 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info