475083
38
Zoom out
Zoom in
Previous page
1/64
Next page
- 38
Explanations of important settings
The signal type of the connectable devices may be very
different. If you are uncertain, leave the setting for Signal
on Autom.-CVBS/YC (e.g. for DVD player/recorder) or Au-
tom.VHS/SVHS (e.g. video recorder), otherwise select the
appropriate signal type. See the glossary on page 60 for
further information.
If the picture from a connected device is to be displayed
immediately on the TV set during playback, select yes. A
switching voltage is allowed so that you do not have to
switch over manually to see the picture of the connected
device. (See the operating manual for the connected
reproduction device.)
When playing from Digital Link Plus devices, the picture is
always displayed immediately, regardless of the setting.
Select the AV socket to which the device of which you
want to hear the digital sound is connected. Connect the
digital output of the external device to the digital input
of the TV set (see page 43). If a device with digital audio
is not connected then select no.
Connection variants of a DVD/video recorder
There are two possibilities for viewing the picture of the connected
recorder:
1. Use appropriate cables in conjunction with the connections assigned
by the connection wizard. This always offers the best quality and
the greatest convenience, such as automatic switch over when
playing from a connected device.
2. You are using the antenna connection between recorder and TV
device. However this reduces the quality.
Connecting an antenna to the DVD/video recorder
If you want to receive and record analogue stations, it is useful to con-
nect the recorder in with the antenna cable (as shown in the connection
example on page 37 bottom right).
If the antenna connection is also used for the playback because the
devicers are not connected by EURO-AV cables, you have to search for
the recorder station and save it in the TV set.
Proceed as follows (see also the operating manual of the connected
recorder):
Insert a DVD/cassette and press play.
Call AV selection.
34Select VIDEO,
OK to switch over.
If no picture is visible on the TV screen when playing the
recorder, search for the recorder station automatically or
set it manually.
To make sure no "normal" TV stations are found in the
station search, pull the antenna plug out of the recorder
antenna input temporarily (the cable to the antenna
system).
Manual recorder station search:
VIDEO is selected by the AV selection.
Call TV menu.
34 Select Settings,
6go to the menu line below.
34 Select Stations,
6go to the menu line below.
34 Select Manal adjustment,
OK to call other settings.
For Channel enter "E30“.
Blue button: Start search.
When you have found the recorder station:
Red button: Overwrite station slot.
Exit TV menu.
Plug the previously removed antenna plug back in.
If disturbances should now occur because a TV station
is being broadcast on the same channel as the station
of the recorder, then you must change the transmission
channel on the recorder and scan for the recorder again
on the TV set.
Operating additional equipment
Signal type
Immediate
playback
Assign digital
audio input
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Loewe Connect 37 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Loewe Connect 37 in the language / languages: English as an attachment in your email.

The manual is 18,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Loewe Connect 37

Loewe Connect 37 User Manual - Dutch - 64 pages

Loewe Connect 37 User Manual - Spanish - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info